PL6-C型紙樣抄取器（快速凱塞法抄片器），是集抄片、真空乾燥於一體的實驗設備，適用於造紙科研院所及造紙廠研究與實驗。它把紙漿抄成φ200的紙樣，然後將該紙樣在乾燥器上乾燥後再進行紙樣物理強度的檢驗，鑒別紙漿原材料性能和打漿工藝規范，同時可完成紙漿的洗滌和濃縮實驗，它的技術指標符合QB/T3703-1999（漿實驗室紙頁的製備+常規紙頁成型器法）ISO 5269/2 & ISO 5269/3, NBR 14380/99, TAPPI T-205, DIN 54358, ZM V/8/76的要求。
結構特點：抄片和真空乾燥一體；白水循環；電動上漿；壓縮空氣勻漿、手動勻漿、快速放水；真空泵輔助抽慮成型，還可抄取超厚紙樣；超細纖維及超厚紙頁成型輔助裝置；噴淋裝置；臺麵材料為不銹鋼噴塑，乾燥體內裝有彈性抽吸壓平裝置，紙樣乾燥厚度可達到10mm，外置水源快速接頭；用戶隻需插上電源插頭，連接水源快速接頭，便可工作。
參數：
1. 試樣直徑： ?200mm
2．真空泵真空度：-0.092~-0.098MPa
3. 真空壓榨力：≈0.1MPa
4．乾燥溫度：≤120℃
5．乾燥時間（定量30-80g/m2）：4-6分鐘
6．加熱功率：1.5KW×2
7．外形尺寸：1800mm×710mm×1300mm
8. 臺麵材料為不銹鋼（304L）。
9. 外加噴灑洗滌裝置。
10. 重量：295Kg
11. 水源狀況：需要連續水源
配件：多孔攪拌器，成型濾網60目、80目，毛佈伏壓輥，標準伏壓輥（304L），標準不銹鋼伏壓板。
註：該款設備，紙樣在真空乾燥過程中，設備對紙樣產生瞭大約0.1MPa的壓榨壓力，如果不需要壓榨，可選擇更換為不帶壓榨的真空乾燥部件。根據用戶需要可選擇訂做：對薄片無壓榨力的乾燥單元。
夾網片
毛佈壓伏輥（3Kg）
標準伏壓輥（13.3Kg）
真空乾燥器上蓋采用具有彈性的孔板，在真空抽力作用下完成對0~10mm厚紙張的壓平真空乾燥。
為設備配備的直徑為200mm的繃網器（更換成形網的專用工具）。
夾網片及網托架
網托架及真空抽慮室，壓縮空氣勻漿。
國標篩網目數及標準篩的網孔尺寸對照表
篩孔（mm） | 目數（目） |
| 篩孔（mm） | 目數（目） | |
4.0 | 5 |
| 0.180 | 85 | |
3.2 | 6 |
| 0.170 | 90 | |
2.5 | 8 |
| 0.150 | 100 | |
2.0 | 10 |
| 0.135 | 110 | |
1.6 | 12 |
| 0.125 | 120 | |
1.43 | 14 |
| 0.111 | 130 | |
1.25 | 16 |
| 0.105 | 140 | |
1.00 | 18 |
| 0.100 | 150 | |
0.90 | 20 |
| 0.097 | 160 | |
0.80 | 24 |
| 0.091 | 170 | |
0.71 | 26 |
| 0.088 | 180 | |
0.63 | 28 |
| 0.080 | 190 | |
0.60 | 30 |
| 0.076 | 200 | |
0.56 | 32 |
| 0.070 | 220 | |
0.50 | 35 |
| 0.065 | 240 | |
0.45 | 40 |
| 0.063 | 250 | |
0.40 | 45 |
| 0.057 | 260 | |
0.355 | 50 |
| 0.055 | 280 | |
0.315 | 55 |
| 0.054 | 300 | |
0.300 | 60 |
| 0.048 | 320 | |
0.250 | 65 |
| 無孔篩 | 底蓋 | |
0.220 | 70 |
|
|
| |
0.200 | 80 | ||||
PL6-C Handsheet Former(RAPID-KOETHEN)
1. Description:
Our this hand sheet former is applicable to research and experiments in papermaking research institutes and paper mills.
It forms pulp into a sample sheet, then puts the sample sheet on the water extractor for drying and then carries out the inspection of the physical intensity of the sample sheet to appraise the performance of the raw material of pulp and beating process specifications. Its technical indicators conform to the international & China specified standard for papermaking physical inspection equipment.
This former combines vacuum-sucking & forming, pressing, vacuum-drying into one machine, and all-electric control.
2. Features:
1) Sheet-forming and vacuum-drying are combined into one machine;
2) White water recycling;
3) Electric pulp-feeding;
4) Compressed air to even the pulp, manual even the pulp, drain out the water fast;
5) Microfiber and thick sample sheet accessories;
6) Spraying device for cleaning;
7) Working table is made of stainless steel (#304)
8) Flexible suction & presser device inside the drying body, the sheet thickness can be 10mm max.;
9) Vacuum pump with automatic anti oil return device;
10) Out-built water source connection outlet, easy operation by connect with power supply and water supply, the machine can work.
11) Three-stage special centrifugal vacuum pump.
3. Specification:
1). Diameter of sample sheet: ≤ 200mm
2). Vacuum degree of vacuum pump: 0.092-0.098MPa
3) Vacuum pressure: about 0.1MPa
4). Drying temperature: ≤120℃
5). Drying time (30-80g/m2 quantitative): 4-6 minutes
6). Heating power: 1.5Kw×2
7) Outline dimensions: 1800mm×710mm×1300mm .
8). Working table material: stainless steel (304L)
9). Equipped with one standard couch roller (304L) with a weight of 13.3Kg.
10). Equipped with a spraying and washing device.
11). Weight: 295kg.
3. Standard:
ISO 5269/2 & ISO 5269/3， 5269/2, NBR 14380/99, TAPPI T-205, DIN 54358, ZM V/8/76
批發市場僅提供代購諮詢服務，商品內容為廠商自行維護，若有發現不實、不合適或不正確內容，再請告知我們，查實即會請廠商修改或立即下架，謝謝。
