美國快速閃點測定機總代理總代理_瀝青試驗儀器_專用儀器儀表_儀器、儀表_貨源

undefined

The Rapid Tester® is a semiautomatic instrument for determining the flash point temperature / combustibility of flammable liquids. Closed cup test temperatures from ambient to 572°F (300°C) are automatically controlled by the set-a-temp adjustable digitally preset target temperature circuitry. Integral digital LCD display, NIST traceable thermometer, disposable fuel tank and electronic timer are standard.

In accordance with:執行標準：
ASTM D 3278 ASTM D 3828 ASTM D 4206 BS 3900 Part A11 BS 3900 Part A13 BS 3900 Part A14 CPSC CFR 16-1500.43a	DOT CFR 49-173.115 IATA Resolution 618 Attachment A IP 303 ISO 3679 ISO 3680 OSHA 29CFR 1910-106 OSHA 29CFR 1910-1200

Quality Assurance
Verify the formulation of liquid products with flammable ingredients.

Compliance Testing
Often required by regulatory agencies before transport or disposal of liquids

Fuel Dilution
Determine the relative percentage of fuel in engine crank case oil to forecast the need for engine rebuilding.

Digital Accuracy

Achieve the high level of digital performance offered only by the Rapid Tester®. The high contrast LCD display has 1/2" characters for ease of reading and is switch selecable between degrees Fahrenheit and Centigrade. A thermometer traceable to the National Institute of Standards & Technology is also included.

Unique set-a-temp circuitry permits simple adjustment and precise automatic regulation of test temperatures. Depress the Preset switch while turning the Temperature Control knob until the target temperature is displayed. Release the switch and set-a-temp takes over! Test cup temperature is automatically shown on the digital LCD display.

Fast Test-Small Sample
Test time is only one minute with a 2 ml sample for flash points below 212°F (100°C). You can run ten tests with the Rapid Tester® in the time that it takes to perform just one by other methods. The 2 ml/4 ml sample is a fraction of the large sample required by other flash point methods. This reduces sampling and disposal problems while improving safety.

Two Models
The Rapid Tester® Closed Cup Model RT-01 has a testing range from -22° to 572°F (-30° to 300°C). Open Cup Model RT-02 tests for flash point levels from ambient to 212°F (100°C).

Compare Results
Independent laboratory testing has demonstrated that the ASTM D 3828 test method utilized by the Rapid Tester® correlates well with other flash point methods. In ASTM D-2 Round Robin testing it was found that the ASTM D 3828 test method has the following correlation coefficients:

D 3828 (Rapid Tester®) vs. D 56 (Tag) = 0.9949
D 3828 (Rapid Tester® vs. D 93 (Pensky-Martens) = 0.9943
D 56 vs. D 93 = 0.9926

With better than 99% comparability you can use the Rapid Tester® with confidence.

Characteristics 技術參數
Performance (RT-01)
Repeatability:	0.5° @ 70°C
	2.0° @ 150°C
Reproducibility:	2.0° @ 70°C
	7.5° @ 150°C
Test Time:	1 min below 212°F
	2 min above 212°F (100°C)
Physical
Cup Type:	RT-01 Closed
	RT-02 Open
Cup Material:	Aluminum (316ss optional)
Dimensions:	15.0 x 3.4 x 6.3"
	(38.1 x 8.64 x 16.25cm)
Display:	LCD digital and NIST traceable mercury-in-glass thermometer
Net Weight:	10 lbs (4.6 Kg)
Power Requirements:	110V / 60Hz or 220V / 50Hz
Sample Size:	RT-01	2 ml below 212°F
		4 ml above 212°F (100°C)
	RT-02	2 ml
Temperature Range:	RT-01	-22° to 572°F (-30° to 300°C)
	RT-02	Ambient to 212°F (100°C)

新手教學

美國快速閃點測定機總代理總代理_瀝青試驗儀器_專用儀器儀表_儀器、儀表_貨源_批發一路發

批發市場僅提供代購諮詢服務，商品內容為廠商自行維護，若有發現不實、不合適或不正確內容，再請告知我們，查實即會請廠商修改或立即下架，謝謝。