商品代碼:4578607

  • 現在位置: 首頁 » 貨源 » 照明 » 電光源材料 »
    供應粉紅螢光粉(圖)
    商品代碼: 4578607
    (可點擊以下立即詢價直接線上諮詢,或來電提供此商品代碼諮詢)
    即日起提供日本樂天代購服務-詳見 Rakuten-suki日本樂天代購,謝謝。
    商品詳細說明

    產品關聯列表
    橙粉 暖白熒光粉 混合粉 LED熒光粉 大功率熒光粉 高亮熒光粉
    ¥:13.00
    對應 英特美 G2762 矽酸鹽熒光粉 綠粉 LED熒光粉 DINO(迪諾)
    ¥:23.00
    R655 LED紅粉 氮化物紅粉 高顯熒光粉 高顯暖白紅粉
    ¥:100.00
    對應 弘大 Y-959 LED熒光粉 大功率高亮熒光粉 德國迪諾(DINO)
    ¥:12.00

    1、簡介
    MZ200

    產品是德國DINO公司自主研製的LED專用紅色螢光粉,與市麵上同類產品相比具有亮度高、熱穩定性好、安全環保的特點,適用於各種LED封裝。


    2
    、產品特性
    2.1
    產品形貌:紅色結晶粉末。
    2.2
    化學成份:硫化鈣
    2.3
    化學穩定性:遇水穩定,在-50300環境中不分解,不變質。
    2.4
    安全性能:符合歐盟RoHS標準,不含任何放射性物質,無毒,不會對人體產生危害,不會污染環境。

    3
    、產品性能指標
    產品編號:MZ200激發波長/nm450~470發光主峰/nm650±2.5nm中心粒徑D50/μm6.16相對亮度/%85%;色品座標:x=0.687±0.005y=0.309±0.005

    4
    、使用方法
    1、將本品均勻分散於環氧膠或矽膠中,經過脫泡處理後點塗到晶片表麵,經過固化等工序完成白光LED的封裝。
    2、將本品和黃色螢光粉按特定比例混合後均勻分散於環氧膠或矽膠中,經過脫泡處理後點塗到晶片表麵,經過固化等工序完成高顯色性或低色溫的白光LED的封裝。

    3、建議膠水與熒光粉之比例為1:(0.12~0.20),可視客戶之要求去調配配比。

     dinoPinkphosphor specifications

    1、 Introduction

    MZ200 products are Germany dino company independently developed the LED for red fluorescent powder, and compared to similar products available in the market with high brightness, thermal stability, security, environmental characteristics, applicable to all kinds of LED package.

    2
    Features
    2.1 products morphology: the red crystal powder.
    2.2 chemical composition: calcium sulfide
    2.3 chemical stability: water stability, and -50
    to 300environment is not biodegradable, eradicating corruption.
    2.4 security: the EU RoHS standards, without any radioactive material, non-toxic and will not harm the human body, will not pollute the environment.

    3
    product performance indicators
    Product Code: MZ200; excitation wavelength / nm: 450 ~ 470; peak luminous / nm: 650 ± 2.5nm; Centre size D50 / μ m: 6.16; relative brightness /%: 85% for color coordinates: x = 0.687 ± 0.005, y = 0.309 ± 0.005;

    4
    to use
    1
    the goods will be evenly spread over the epoxy or silicone gel, foam from the point after the chip surface to Tu, after completion of curing processes, such as white LED package.
    2
    the Commodities and yellow fluorescent powder on a specific ratio mixture evenly spread over the epoxy or silicone gel, foam from the point after the chip surface to Tu, after completion of curing processes, such as the color of high or low temperature The white LED package.

    3glue and phosphor of the proposed ratio of 1: (0.12 to 0.20), visualization customers to request the deployment of proportion.

    5
    uses
    A blue chip package with peach red LED.
    B and yellow fluorescent powder with the use, color package of high or low temperature of the white LED.

    6
    packaging
    Bottled Standard: 100 g / bottles, 1000 g / bottles, 2000 g / bottle
    Pocket-convenient: 100 ~ 500 g / bag (based on user needs custom)

    ----------------------------------------------------------------------------------



    新手教學
    供應粉紅螢光粉(圖)_電光源材料_照明_貨源_批發一路發
    批發市場僅提供代購諮詢服務,商品內容為廠商自行維護,若有發現不實、不合適或不正確內容,再請告知我們,查實即會請廠商修改或立即下架,謝謝。
    相關商品
    line 線上客服  ID@tsq1489i
    線上客服