一、設備用途:The application
本設備是為變壓器行業大型絕緣紙筒熱壓粘合而設計,是能對卷圓後的絕緣紙筒在一定的壓力和溫度條件下進行熱壓粘合成型的專用加工設備。
It is designed especially for bonding the large cylinder of insulation pressboard in the field of transformer, i.e. the hot sticking on the juncture of the insulation pressboard rolled into cylinder under certain pressure and temperature conditions.
二、主要技術參數 The main technical parameters
1、粘接紙板厚度: The pressboard’s thickness 1.5—6mm
2、熱粘紙筒最大長度: The Max. Length of cylinder to stick hotly 3200mm
3、粘合介面最大寬度: The Max. width of overlapping part: 140mm
4、熱粘紙筒直徑范圍: The range of Dia. for cylinder to stick hotly Φ400—Φ3000mm
5. 系統壓力: The system pressure8MPa
6、加熱方式:電加熱,工件粘合溫度70cº—110c°可調
The heating method: Electrical heating, and the bonding temperature 70cº—110c°,adjustable.
三、主要機構性能 The performance of the main structure
1、本專用機床有機械部分(機座、壓梁)、液壓系統、電氣控製、加熱等四大部分組成。機座、壓梁采用鋼板焊接並經過振動時效處理,液壓站、液壓缸采用國內優質產品。
This machine has four major components such as mechanical part (pedestal and beam), hydraulic system, electrical control and heating system. The pedestal and the beam is made by steel plates welded and treated by VSR. And the hydraulic station and the hydraulic cylinders are selected Chinese products with high-quality.
2.液壓缸采用上頂式,液壓缸的數量要保證壓梁、模具有足夠的強度和剛度,不能有用眼發現明顯的變形,液壓系統不準滲漏油。
The cylinders are upward and their number should guarantee the beam and mold to have enough strength and stiffness. The visual deformation and leaking oil are not permitted.
3、機床具有溫度、壓力、時間系數的設定及調控功能。
This machine has the setting of temperature, pressure and time coefficient as well as the function of control and regulating.
4、機床帶有圓筒支撐架。
The machine has the cylindrical support frame.
新手教學
批發市場僅提供代購諮詢服務,商品內容為廠商自行維護,若有發現不實、不合適或不正確內容,再請告知我們,查實即會請廠商修改或立即下架,謝謝。