用途：
直流MFZ10-YC系列電磁鐵，適用於單相橋式全波整流的直流電源，電壓至220V的電路中。MFB10-YC系列電磁鐵適用於交流50HZ至220V控製電路中。
交流：MFJ10YC系列電磁鐵，適用於交流50HZ、電壓至380V控製電路中，作為液壓電磁換向閥的動力元件。可配套德國力士樂、六、十通徑螺紋連接的電磁換向閥。
*當電源為交流時可以選用MFB10-YC交流本整型電磁鐵，其性能和MFZ10-YC完全相同。
主要技術參數
參數型號 | MFZ10-22YC | MFZ10（B10）-37YC | MFZ10（B10）-90YC | MFJ10-27YC | MFJ10-54YC |
額定電壓(V) | 24 110 220 | 12 24 110 220 | 12 24 110 220 | 110 220 | 110 220 |
額定吸力(N) | ≥22 | ≥37 | ≥90 | ≥27 | ≥54 |
額定行程(mm) | 2.8（3） | 2.8（3） | 3.6（4） | 2.8（3） | 3.6（4） |
全行程(mm) | ≥6.5 | ≥6.5 | ≥8.5 | ≥6.5 | ≥8.5 |
耐油壓(MPa) | 導磁套均可承受油壓21MPa | ||||
消耗功率(W) | ≤30 | ≤30 | ≤40 | ≤26 | ≤40 |
絕緣等級 | F級 | ||||
連接螺紋 | M20×1 | M20×1 | M26×1.5 | M20×1 | M26×1.5 |
外形及安裝尺寸
_clip_image002.jpg)
MFZ10-37YC_clip_image004.jpg)
MFZ10-90YC
使用註意事項：
●電磁鐵采用符合ISO4400標準的插座。有帶指示燈、不帶指示燈兩種規格，您可以根據需要進行選擇。帶指示燈插座的電壓規格必須與電磁鐵本體電壓規格相符。
●電磁鐵的手動推桿用於在調試時或緊急情況下，進行手動控製。但當系統背壓較高，調節困難時，請使用十字螺絲刀緩推手推桿，不宜使用沖擊力，以免破壞手動推桿和導向內孔表麵，造成電磁鐵漏油或不能復位。
●當雙向使用電磁鐵時，一定要保證兩個電磁鐵不能同時通電，以免電磁閥不能正常工作。·電氣控製系統與電磁鐵連接部分之間應設有過流保護裝置，以免在非正常情況下，燒毀電磁鐵及您的電控元件。
樣本說明：
●如顧客有不同的需要，在電磁鐵性能不變的情況下，電磁鐵與閥體的連接尺寸、推桿伸出長度及工作電源電壓可以根據要求調整。
●特性曲線僅供參考。
●對超出本樣本要求應用場合的，請詢問本廠。
●主要性能參數均為試驗條件下獲得。本公司保留修改參數的權利。
Application:
DC:MFZ10-YC series of hydraulic solenoids apply to circuit of single-phase bridge type full-wave rectifier,voltage up to 220V.
AC:MFJ10-YC series of hydraulic solenoids apply to control circuit of AC 50Hz,voltage up to 380V.being used as power unit of hydraulic directional control valves.They can form a complete set of Germany REXROTH,6,10 DN threaded hydraulic directional control valves.
*When the power is AC.The user can choose MFB10YC AC hydraulic solenoids,whose performance is completely the same as MFZ10-YC.
Specifications
parameterstype | MFZ10-22YC | MFZ10(B10)-37YC | MFZ10(B10)-90YC | MFJ10-27YC | MFJ10-54YC |
Rated Voltage(V) | 24 110 220 | 12 24 110 220 | 12 24 110 220 | 110 220 | 110 220 |
Rated Force(N) | ≥22 | ≥37 | ≥90 | ≥27 | ≥54 |
| Rated Stroke(mm) | 2.8(3) | 2.8(3) | 3.6(4) | 2.8(3) | 3.6(4) |
| Overall Stroke(mm) | ≥6.5 | ≥6.5 | ≥8.5 | ≥6.5 | ≥8.5 |
Endurable oil pressure(MPa) | Magnetic housing all can endure oil pressure of 21MPa | ||||
Consumption Power(W) | ≤30 | ≤30 | ≤40 | ≤26 | ≤40 |
Insulation grade | Grade F | ||||
oint screw thread | M20×1 | M20×1 | M26×1.5 | M20×1 | M26×1.5 |
External Shape and Installing Dimension
MFZ10-37YC
MFZ10-90YC
Note:
Hydraulic solenoid adopts plug bases meeting the requirements of the ISO4000 or DIN43650 standard. The user can choose at his needs between the two specifications, including plug base with indicator light and plug base without indicator light. The voltage specification of the plug base with indicator light should conform to the voltage specification of the solenoid itself.
The manual jogger of the solenoid should be controlled by hand only in the debugging or critical situation. However, when the backing pressure of the system is pretty high and difficult to adjust, the user should use the cross head driver to slowly push the manual jogger instead of using impact force so as to avoid destroying the manual jogger and the surface of the direction hole which will cause the solenoid to leak the oil and unable to reset.
When the solenoid is used Bi-direction, it should be insured that the two solenoid cannot be electrified at the same time so as to avoid the malfunction of the solenoid.
Overcurrent protection system should be used in the connection part between electric control system and solenoid so as avoid burning the solenoid and electronic control units under improper condition.
Explanation Of Sample:
If client have special requirements,we can adjust the connect dimension,the extended length of push pin,and the supply voltage between solenoids and valve body.
Characteristic curve for reference only.
If the application is beyond the catalogue,please contact with us.
The main performance parameter is obtained in the conditions of lab.Finally explanation and changing of the parameters by Tonly.
詳情請訪問http://www.nb-tongli.com
批發市場僅提供代購諮詢服務，商品內容為廠商自行維護，若有發現不實、不合適或不正確內容，再請告知我們，查實即會請廠商修改或立即下架，謝謝。
