用途：
交、直流濕式閥用電磁鐵，分別用於交流50-60Hz電壓至220V的交流電源和電壓至220V的直流電源的控製線路中，作為螺紋連接型電磁換向閥的動力元件。*交流電壓至220V適宜推廣MFB9-YC系列
主要技術參數
| 參數型號 | MFZ9-22YC | MFZ9（B9）-37YC | MFZ9（B9）-90YC | MFJ9-27YC | MFJ9-54YC |
| 額定吸力(N) | 22 | 37 | 90 | 27 | 54 |
| 額定行程(mm) | 2.8（3） | 2.8（3） | 3.6（4） | 2.8（3） | 3.6（4） |
| 全行程(mm) | ≥6.5 | ≥6.5 | ≥8.5 | ≥6.5 | ≥8.5 |
| 額定電壓(V) | 直流6-220V，交流110-380V | ||||
| 耐油壓(MPa) | 導磁套均可承受油壓21MPa | ||||
| 消耗功率(W) | ≤30 | ≤30 | ≤40 | ≤26 | ≤40 |
| 絕緣等級 | F級 | ||||
| 連接螺紋 | M20×1 | M20×1 | M26×1.5 | M20×1 | M26×1.5 |
| 型號尺寸 | Amax | Hmax | Bmax | d1 | d2 | d3 | d4 | d5 | L1 | L2 | L3 | L4 | L5 |
| MFZ9-22YC | 35 | 74 | 43.2 | Ф5 | Ф8.7 | Ф15 | Ф16.8 | M20×1 | 13.2 | 8.4 | 3.6 | 2.8 | 12.4±0.1 |
| MFZ9-37YC | 44 | 74 | 52 | Ф5 | Ф8.7 | Ф15 | Ф16.8 | M20×1 | 13.2 | 8.4 | 3.6 | 2.8 | 6.5±0.1 |
| MFZ9-90YC | 69 | 110 | 75.6 | Ф8.7 | Ф18 | Ф21.4 | Ф23 | M26×1.5 | 12.7 | 10 | 3.1 | 3 | 5.6±0.1 |
| MFJ9-27YC | 44 | 74 | 52 | Ф5 | Ф8.7 | Ф15 | Ф16.8 | M20×1 | 13.2 | 8.4 | 3.6 | 2.8 | 6.5±0.1 |
| MFJ9-54YC | 69 | 72.5 | 75.6 | Ф8.7 | Ф18 | Ф21.4 | Ф23 | M26×1.5 | 12.7 | 10 | 3.1 | 3 | 5.6±0.1 |
外形及安裝尺寸
Application:
AC、DC wet-type solenoid for valves are respectively used in power control line of AC power with AC 50-60Hz, voltage up to 220V and of DC power with voltage up to 220V and are used as power units of threaded type back pressure controlled valves.
*MFB9-YC series are suitable to be introduced when AC voltage up to 220V.
Specifications
| parameterstype | MFZ9-22YC | MFZ9（B9）-37YC | MFZ9（B9）-90YC | MFJ9-27YC | MFJ9-54YC |
| Rated force(N) | 22 | 37 | 90 | 27 | 54 |
| Rated stroke(mm) | 2.8（3） | 2.8（3） | 3.6（4） | 2.8（3） | 3.6（4） |
| Full travel(mm) | ≥6.5 | ≥6.5 | ≥8.5 | ≥6.5 | ≥8.5 |
| Rated voltage(V) | DC6-220V，AC110-380V | ||||
| Endurable oil pressure(MPa) | Magnetic housing all can endure oil pressure of 21MPa | ||||
| Consumption Power(W) | ≤30 | ≤30 | ≤40 | ≤26 | ≤40 |
| Insulation grade | Grade F | ||||
| Joint screw thread | M20×1 | M20×1 | M26×1.5 | M20×1 | M26×1.5 |
| typedims | Amax | Hmax | Bmax | d1 | d2 | d3 | d4 | d5 | L1 | L2 | L3 | L4 | L5 |
| MFZ9-22YC | 35 | 74 | 43.2 | Ф5 | Ф8.7 | Ф15 | Ф16.8 | M20×1 | 13.2 | 8.4 | 3.6 | 2.8 | 12.4±0.1 |
| MFZ9-37YC | 44 | 74 | 52 | Ф5 | Ф8.7 | Ф15 | Ф16.8 | M20×1 | 13.2 | 8.4 | 3.6 | 2.8 | 6.5±0.1 |
| MFZ9-90YC | 69 | 110 | 75.6 | Ф8.7 | Ф18 | Ф21.4 | Ф23 | M26×1.5 | 12.7 | 10 | 3.1 | 3 | 5.6±0.1 |
| MFJ9-27YC | 44 | 74 | 52 | Ф5 | Ф8.7 | Ф15 | Ф16.8 | M20×1 | 13.2 | 8.4 | 3.6 | 2.8 | 6.5±0.1 |
| MFJ9-54YC | 69 | 72.5 | 75.6 | Ф8.7 | Ф18 | Ф21.4 | Ф23 | M26×1.5 | 12.7 | 10 | 3.1 | 3 | 5.6±0.1 |
External Shape and Installing Dimension
Note:
Hydraulic solenoid adopts plug bases meeting the requirements of the ISO4000 or DIN43650 standard. The user can choose at his needs between the two specifications, including plug base with indicator light and plug base without indicator light. The voltage specification of the plug base with indicator light should conform to the voltage specification of the solenoid itself.
The manual jogger of the solenoid should be controlled by hand only in the debugging or critical situation. However, when the backing pressure of the system is pretty high and difficult to adjust, the user should use the cross head driver to slowly push the manual jogger instead of using impact force so as to avoid destroying the manual jogger and the surface of the direction hole which will cause the solenoid to leak the oil and unable to reset.
When the solenoid is used Bi-direction, it should be insured that the two solenoid cannot be electrified at the same time so as to avoid the malfunction of the solenoid.
Overcurrent protection system should be used in the connection part between electric control system and solenoid so as avoid burning the solenoid and electronic control units under improper condition.
Explanation Of Sample:
●If client have special requirements,we can adjust the connect dimension,the extended length of push pin,and the supply voltage between solenoids and valve body.
●Characteristic curve for reference only.
●If the application is beyond the catalogue,please contact with us.
●The main performance parameter is obtained in the conditions of lab.Finally explanation and changing of the parameters by Tonly.
批發市場僅提供代購諮詢服務，商品內容為廠商自行維護，若有發現不實、不合適或不正確內容，再請告知我們，查實即會請廠商修改或立即下架，謝謝。
