產品說明

The product description

在線式本安型氫中氧分析機 本安型氫中氧測試機 氫中氧檢測機

This safety type hydrogen oxygen analyzer on-line in this Ann type hydrogen oxygen oxygen detector in hydrogen tester

型號:G80033

Model: G80033

1.安裝

1. Install

樣品壓力大約為0.1MPa，如果沒有吸氣器或是泵的應該配一個，樣品與機器通過 1/8"外徑管連接，並且在進口配有流量調節閥

Sample pressure is about 0.1 MPa, if there is no aspirator or pump should match a, samples and instruments through 1/8 "diameter pipe connection, and at the inlet is equipped with a flow control valve

電氣設備必須安裝在安全區域，控制室指示器和報警器作為可選件也可以提供。

Electrical equipment must be installed in a safe area, control indicator and alarm as optional parts can also be provided.

2.特點

Characteristics of 2.

可靈活維修的樣氣池

Flexible maintenance sample gas pool

簡單的空氣校驗

A simple air calibration

3.應用

3. The application of

①惰性氣體

(1) an inert gas

②手套箱

(2) the glove box

③氣體純度檢驗

(3) gas purity test

④缺氧監測

(4) of oxygen monitoring

⑤氣體在線監測

(5) gas on-line monitoring

⑥冶金工業

6. metallurgical industry

⑦氫氣生產監測

All landowners hydrogen production monitoring

4、技術參數

4, technical parameters

精度：滿量程的±1%

Accuracy: full range of plus or minus 1%

分辨率：0.05%刻度

Resolution: 0.05% scale

測量范圍：6種可選量程0-10，0-100，0-1000ppm或0-1%，0-10%，0-30%

Measuring range: 6 kinds of optional range 0 to 10, 0, 0-100-1000 parts per million (PPM) or 0-1%, 0-10%, 0-30%

響應時間：20S內達90%

Response time: within 20 s is up to 90%

校正：大氣（20.9%）或標氣

Correction: the atmosphere (20.9%) or the gas

測量方法：燃料電池型

Measurement: the fuel cell type

5、操作條件

5, operating conditions,

樣氣壓力要求：0.1-1Bar在標準系統中可到17Bar

Sample gas pressure requirements: 0.1 1 bar in the standard system to 17 bar

樣氣流量范圍：30ml/min-5L/min

Sample gas flow range: 30 ml/min - 5 l/min

樣氣溫度：-5℃-45℃

The sample temperature: - 5 ℃ - 45 ℃

樣氣連接：直徑 1/8" 的緊壓式接頭

Sample gas connections: 1/8 "diameter compression type connector

最大阻抗：400Ω

Maximum impedance: 400 Ω

提供電壓：在安全環境下24V直流電壓

Provide voltage: 24 v dc voltage in a safe environment

功率：100

Power: 100

顯示：數顯或模擬顯示

Display: display or analog display

6外形和尺寸

6 shapes and sizes

外殼：加強聚脂樹脂

Shell: strengthen the polyester resin

尺寸：200*200*175mm

Size: 200 * 200 * 175 mm

重量：3KG

Weight: 3 kg

進口保護：IP65

import protection: IP65