全電腦單柱拉力試驗機
1. 設備介紹Device introduction:
本機可測試橡膠,塑膠,皮革,尼龍線,織物,紙及航空,包裝,建築,石化,電工,車輛等材料之拉伸,壓縮,彎折,剪力,粘接力,剝離,撕裂等試驗. The machine can test rubber, plastic, leather, nylon yarn, fabric, paper and packaging, construction, aviation, petrochemical,
electric vehicles and other materials, tensile, compression, bending, shear, adhesive, peeling, tearing test.
設備規格Device Specification:
產品選型與技術參數Model selection & Technical parameters | ||||||||
型號選擇Model No. | RX-50 | RX-100 | RX-200 | RX-500 | RX-1000 | RX-2000 | RX-5000 | |
容量選擇Capacity selection | 5KG | 10KG | 20KG | 50KG | 100KG | 200KG | 500KG | |
控制方式 Control type | 單片機控制MCU Control | Model No.+M | ||||||
電腦控制Computer control | Model No.+C | |||||||
單位切換Switch unit | kgf, lbf, N , kN, kPa, MPa | |||||||
荷重分解度load resolution | 1/250,000 | |||||||
荷重精度Load precision | + / - 1.0% or + / - 0.5%(optional one) | |||||||
最大行程Maximum stroke | 450mm,650mm, 800mm((optional one) | |||||||
有效寬度Effective width | 130mm | |||||||
測試速度Test speed | 0.01~500 mm/min | |||||||
位移分解度Displacement resolution, | 0.01 mm | |||||||
數據采樣頻率The data sampling frequency | 200 次/秒 | |||||||
驅動電機The drive motor | AC servo motor | |||||||
傳動桿Transmission mechanism | High Accuracy of Ball Screw | |||||||
主機尺寸Size (W×D×H) | 480500x1500 mm | |||||||
通訊接口Communication interface | RS232 | |||||||
機臺重量Weight | 95kg | |||||||
電 源Power supply | AC220V or According to country designated |
批發市場僅提供代購諮詢服務,商品內容為廠商自行維護,若有發現不實、不合適或不正確內容,再請告知我們,查實即會請廠商修改或立即下架,謝謝。