廣州泓通為您提供全新功能水平垂直燃燒試驗機，滿足UL94水平垂直燃燒、94HB、94-5VA、95-5VB、IEC
60695-11-4、GB5169、GB11020等標準要求等標準。
水平垂直燃燒試驗機
產品概述：本裝置符合UL94、94HB、94-5VA、95-5VB、IEC 60695-11-4、GB5169、GB11020等標準要求；適用於對電器設備和器具的塑料材料部件進行水平、垂直可燃性試驗，（可訂制印刷電路板用覆銅箔基材料可燃性試驗裝置，符合GB/T4722）。
50W 500W
計時裝置 9999X0.1s 9999X0.1s
燃燒角度 0°、20°、45° 0°、20°、45°
火焰高度 20~180mm 50~255mm
噴燈標準 IEC60695-11-4 IEC60695-11-3
溫度檢測 MAX 1100°C MAX 1100°C
氣體流量 105±5 ml/min 965±30ml/min
氣體壓力 0.1 Mpa/300mm水 0.1 Mpa/125±5mm
水校驗時間 44±2S 54±2S
流量精度 1% 1%
銅塊重量 1.76 g±0.01 g 10±0.05 g
氣體類別 甲烷 甲烷
設備外尺寸：1100mm寬×700mm深×1300mm高
Products Information
Horizontal-Vertical Flame Tester HVF-1
Product details: The Horizontal-Vertical Flame Tester is a fully automatic instrument contained in its own cabinet to maximize the safety of the operator. It screening procedure for comparing the relative burning behaviour specimens made from plastic and other non-metallic materials ,exposed to a flame ignition source of 50W or 500W nominal power. These test methods determine the linear burning rate and the afterflame/afterglow times,as well as the damaged length of specimens.They are applicable to solid and cellular materials that have an apparent density of not less than 250kg/m3,determined in accordance with ISO845.Then do not apply to materials that shrink away from the applied flame without ignitiong;ISO9773 should be used for thin flexible materials. And it's the combustion test device of plastic materials represented by UL-94. It can perform each test of HB, V0 to V2, 5V and VTM, HBF.
Product three type: 50W、500W、50~500W mixed-type test equipment
SPECIFICATIONS:
Test Flame | 50W(burning test for V-0,V-1,V-2 classification) |
Burner Tube | Internal diameter: ф 9.5mm±0.3mm, length:100mm±10mm |
Burning Angle | 0°,20°,45° |
Thermocouple | Type K (Ni/Cr - Ni/Al) |
Thermocouple Size O/D | 0.5 mm |
Standard Copper Block | Ф5.5mm±0.01mm, weight:1.76g±0.01g before drilling. Cu-ETP |
Time for Temperature to Increase | From 100°C±5°C to 700°C±3°C; 44s±2s (preset) |
Overall Height | 18mm~22mm(adjustable) |
Gas Supply | methane,min.98% purity |
Flowmeter | 105ml/min±2% |
Manometer | 0KPa to 7.5KPa |
Input Power | 220 V 50 Hz 3A or 115 V 60Hz Optional |
Volume Of Chamber | >0.75m³, black interior |
Outer Dimensions | W*D*H=1100mm*550mm*1100mm |
Conform to standard | UL94,IEC60695-11-4,IEC60695-11-10 |
Fitted to the base plate are a flame height scale, a level and adjustable feet. | |
DIGITAL TEMPERATURE DISPLAY | |
Includes: 50W Flame height gauge and 100% absorbent cotton
SPECIFICATIONS:
Test Flame | 500W(burning test for V-0,V-1,V-2 classification) |
Burner Tube | Internal diameter: ф 9.5mm±0.3mm, length:100mm±10mm |
Burning Angle | 0°,20°,45° |
Thermocouple | Type K (Ni/Cr - Ni/Al) |
Thermocouple Size O/D | 0.5 mm |
Standard Copper Block | Ф9mm±0.01mm, weight：10g±0.05g before drilling. Cu-ETP |
Time for Temperature to Increase | From 100°C±5°C to 700°C±3°C; 54s±2s (preset) |
Flowmeter | 965ml/min±2% |
Gas Supply | methane,min.98% purity |
Manometer | 0KPa to 7.5KPa |
Input Power | 220 V 50 Hz 3A or 115 V 60Hz Optional |
Volume Of Chamber | >0.75m³, black interior |
Outer Dimensions | W*D*H=1100mm*550mm*1100mm |
Conform to standard | UL94、IEC60695-11-3、IEC60695-11-20 |
Fitted to the base plate are a flame height scale, a level and adjustable feet. | |
DIGITAL TEMPERATURE DISPLAY | |
Includes:500W Flame height gauge and 100% absorbent cotton
批發市場僅提供代購諮詢服務，商品內容為廠商自行維護，若有發現不實、不合適或不正確內容，再請告知我們，查實即會請廠商修改或立即下架，謝謝。
