產品品牌：ipega

產品型號：PG-IH099

 

本公司供應iPhone/iPad 藍牙音箱，品牌ipega，型號PG-IH099。質量保證，歡迎咨詢洽談。

Introduction（產品介紹）

  本產品采用標準藍牙芯片，10M超長藍牙傳輸距離，闡釋無線之魅，智能掌控生活，完美支持iPod,iPhone,iPad及所有支持藍牙立體聲功能的手機，MP3，MP4等。

-內置長效的鋰電，方便室內移動，不管臥房還是書房，隨時隨地持久暢享音樂。

-使用高效能，低功耗的class D類微型數字功放電路。

-帶6項功能操作，包括音響開關、播放/暫停、音量“+/-”、上一曲、下一曲。

-設有3.5mm通用音頻接口，支持多種音頻播放器。

-Mini USB充電接口設計，可選擇PC設備的USB接口供電、或USB電源適配器進行供電。

產品配件:

Mini USB充電線 1PC

3.5mm音頻線 1PC

電性參數：

頻率響應:20Hz-20KHz                       

信噪比:80Db                                         

輸入電壓/電流:DC5V/500mA                             

電池容量:1000mAh                                     

喇叭功率:4Ω5W；    藍牙傳輸距離：≤10M

User Manual（使用說明） 

 1. 打開音響開關由OFF撥至ON，藍牙提示音響起，藍牙指示燈紅藍交替閃爍。

 2. 打開iPhone的藍牙功能，搜索音頻設備"MARB0092"進行配對連接，并根據提示輸入密碼"0000"，連接成功后，藍牙指示燈轉為藍燈慢閃。

 3. 播放音樂時，單次按下音箱的“VOL-”為上一曲，“VOL+”則為下一曲，長按“VOL+”“VOL-”即可調節音量大小，長按“Play / Pause”5秒，音箱進入待機狀態，待機時按下“Play / Pause”鍵，便可重新自動對碼連接。

 4. 對音箱進行充電時，只需使用USB充電線連接音箱至PC的USB接口，或用iPhone原裝電源適配器接入市電即可，充電過程中，電源指示燈為紅燈長亮，電量飽和后指示燈熄滅。

Introduction:

This product uses the standard Bluetooth chip with 10M Bluetooth transmission distance. It supports iPod, iPhone, iPad, mobiles and MP3, MP4  with Bluetooth stereo function.

- Built-in long-lasting lithium battery. Convenient to users. Users can use it in bedroom or anywhere freely to enjoy the music.

- Use class D miniature digital amplifier circuit with high-performance, low-power consumption.

- With six functional operations, including the audio switch, play / pause, volume + / - , previous 、 next.

- With a 3.5mm universal audio interface that supports for multiple audio player.

- Mini USB charging interface design. Users can use USB interface of the PC device, or USB power adapter to supply power.

 

Product Include:

Mini USB Charging Cable 1PC

3.5mm audio cable 1PC

 

Electrical parameters:

Frequency : 20Hz-20KHz

SNR: 80Db

Input voltage / current: DC5V/500mA

Battery capacity: 1000mAh

Speaker power: 4Ω5W

Bluetooth transmissiondistance ：≤10M

User Manual:

1. Turn on the audio, the voice of Bluetooth indicator sound, at the sametime the red and blue light of Bluetooth indicator will flash alternatively. 

2. Turn on the Bluetooth function, searching and connecting the audio frequency appliance “MARB0092”. Following the instruction and enter password “0000”. When the connection successfully, Bluetooth indicator into blue light flash slowly.

3. When playing music, single press “VOL-“for the previous song, single press “VOL+” for next song. Long press “VOL-““VOL+” to adjust the volume. Press “Play/ Pause” 5 seconds into standby mode. Press the "Play / Pause" key in standby mode can re-connected to the code automatically.

4. For charging the speaker, the USB charging cable can be use to connect the speakers to the PC’s USB port, or using the original iPhone power adapter to charge. The process of charging,  the red light of power indicator is always bright. , power indicator goes off When saturated

 

QTY：20 PCS                                                NW：11.30 KGS                                             GW： 12.26 KGS                                        MEAS：54X26.5X32 CM