註意：另外此產品僅用於測試信號強弱(不支持中九中六信號)，請謹慎選購！
ws-6903是專供歐美出口產品
6903使用極為簡單隻要把SATlink WS-6903尋星機串接在衛星接收機與高
頻頭之間即可， 然後打開衛星接收機將節目切換到要進行調試的衛星中的節目
上，然後觀察尋星機上的數字調整天線，當對準衛星時尋星機上的數值會有變化
達到40時會鎖定信號並發出報警，調整天線直到數值變成最大即可。
SATlink WS-6903不需要任何外部電源或電池就可以工作，所以不用擔心像其它尋
星機一樣電池沒電後無法工作的問題，另外LED數位管在太陽下一樣看得清楚。
WS-6903
2.Easily set up satellite dishes on RVs
3.with audio tone
4.Works with multiple dish
Digital Displaying satellite finder
- Easily setup satellite dishes on RVs,
- Make adjustments yourself without a second helper
- What took 30 minutes now took 30 seconds
Specifications
WS-6903 Specification: | |||
Item | Specification | Item | Specification |
Frequncy Range | 950-2150 MHZ | Supply Voltage | 13-18V DC |
Input Level Range: | -40dBm~~-10dBm | Operating Temperature | 0~~+40°C |
Impedance | 75Ω | ||
Main Function:
For the systems without automatic satellite tuning capability.
Connect to your LNBF and receiver to the satellite finder to track the clearest setting for the satellite you wish to tune to.
Meter with LED displayer helps you know the strength of the signal clearly
Meter with audio tone helps you align satellite antenna to signal. Audio signal gets louder at the best setting.
Works with multiple dish systems.
Close or open the audio tone
With four steps gain for the satellite signal,you can increase or decrease the gain of the meter
批發市場僅提供代購諮詢服務，商品內容為廠商自行維護，若有發現不實、不合適或不正確內容，再請告知我們，查實即會請廠商修改或立即下架，謝謝。
