聯系人：陳顏 13691668515 qq:1293252148 [email protected]
深圳市霍尼斯特科技有限公司特價供應歐姆龍元器件
聯系人：陳顏 電話：0755-27826651
傳真：0755-27091536 手機：13691668515
CSM_XW2Z_DS_E_3_1
1
Connecting Cables for Connector-Terminal Block Conversion Units
XW2Z
Connect Connector-Terminal
Block Conversion Units (XW2@) to
I/O Units for Programmable
Controllers with one touch.
Ordering Information
For 32-point, Connector-type I/O Units for Programmable Controllers
XW2Z-@@@A
(For XW2D-20G6/XW2B-20G@/-40G5-T/-20G5-D/
XW2C-20G5-IN16/20G6-IO16/XW2E-20G5-IN16/
XW2F-20G7-IN16/-OUT16/XW2N-20G8-IN16)
*Cable length L (m)
XW2Z-@@@AU (For XW2D-20C6)
Cable length L (m) * Model
0.5 XW2Z-050A
1.0 XW2Z-100A
1.5 XW2Z-150A
2.0 XW2Z-200A
3.0 XW2Z-300A
5.0 XW2Z-500A
10.0 XW2Z-010A
15.0 XW2Z-15MA
20.0 XW2Z-20MA
L
Cable length L (m) * Model
0.5 XW2Z-050AU
1.0 XW2Z-100AU
1.5 XW2Z-150AU
2.0 XW2Z-200AU
3.0 XW2Z-300AU
5.0 XW2Z-500AU
XW2Z
2
For 32-point, Connector-type I/O Units (Group 2) for Programmable Controllers
For 64-point, Connector-type I/O Units for Programmable Controllers
XW2Z-@@@B (For XW2D-40G6/XW2B-40G@)
*Cable length L (m)
XW2Z-@@@BU (For XW2D-40C6)
XW2Z-@@@B-A (For XW2F-40G7-IN32)
XW2Z-@@@B-B (For XW2F-40G7-OUT32)
For 32-point, Connector-type Input Units (Group 2) for Programmable Controllers
For 64-point, Connector-type Input Units for Programmable Controllers
XW2Z-@@@D
20-pole Cable with Discrete-wire Press-fit Terminals
XW2Z-@@@F
Type Cable length L (m) * Model
Normal
wiring
0.5 XW2Z-050B
1.0 XW2Z-100B
1.5 XW2Z-150B
2.0 XW2Z-200B
3.0 XW2Z-300B
5.0 XW2Z-500B
10.0 XW2Z-010B
15.0 XW2Z-15MB
20.0 XW2Z-20MB
Reverse
wiring
0.5 XW2Z-050B-R1
1.0 XW2Z-100B-R1
1.5 XW2Z-150B-R1
2.0 XW2Z-200B-R1
3.0 XW2Z-300B-R1
5.0 XW2Z-500B-R1
L
Type Cable length L (m) * Model
Normal
wiring
0.5 XW2Z-050BU
1.0 XW2Z-100BU
1.5 XW2Z-150BU
2.0 XW2Z-200BU
3.0 XW2Z-300BU
5.0 XW2Z-500BU
Type Cable length L (m) * Model
Normal
wiring
1.0 XW2Z-100B-A
1.5 XW2Z-150B-A
2.0 XW2Z-200B-A
3.0 XW2Z-300B-A
5.0 XW2Z-500B-A
Type Cable length L (m) * Model
Normal
wiring
1.0 XW2Z-100B-B
1.5 XW2Z-150B-B
2.0 XW2Z-200B-B
3.0 XW2Z-300B-B
5.0 XW2Z-500B-B
Cable length L (m) *
Model
1.0 0.75 XW2Z-100D
1.5 1.25 XW2Z-150D
2.0 1.75 XW2Z-200D
3.0 2.75 XW2Z-300D
5.0 4.75 XW2Z-500D
10.0 9.75 XW2Z-010D
15.0 14.75 XW2Z-15MD
20.0 19.75 XW2Z-20MD
Cable length L (m) * Model
1.0 XW2Z-100F
1.5 XW2Z-150F
2.0 XW2Z-200F
3.0 XW2Z-300F
5.0 XW2Z-500F
10.0 XW2Z-010F
15.0 XW2Z-15MF
20.0 XW2Z-20MF
*Cable length L (m)
A
B
Yellow
Black
(250 mm) CN3
(500 mm) CN2
CN1
A B
*Cable length L (m)
L
Forked
terminals
XG4M-2030-T (M3.5)
Devices
300 (mm)
XW2Z
3
For 32-point, Connector-type Output Units (Group 2) for Programmable Controllers
For 64-point, Connector-type Output Units for Programmable Controllers
XW2Z-@@@L
For 96-point, Connector-type I/O Units for Programmable Controllers
XW2Z-@@@H-1 (For CS1-series I/O Unit Connection)
*Up to two cables required for each Programmable Controller I/O Unit.
Note: CS1 signal names connected to the XW2B/D are different for the XW2Z-@@@H-@ and the XW2Z-@@@H-@G.
Refer to the I/O Signal Tables on page 9.
XW2Z-@@@H-2 (For CS1-series I/O Unit Connection)
*Up to two cables required for each Programmable Controller I/O Unit.
Note: CS1 signal names connected to the XW2B/D are different for the XW2Z-@@@H-@ and the XW2Z-@@@H-@G.
Refer to the I/O Signal Tables on page 9.
Cable length L (m) *
Model
1.0 0.75 XW2Z-100L
1.5 1.25 XW2Z-150L
2.0 1.75 XW2Z-200L
3.0 2.75 XW2Z-300L
5.0 4.75 XW2Z-500L
10.0 9.75 XW2Z-010L
15.0 14.75 XW2Z-15ML
20.0 19.75 XW2Z-20ML
Special Connecting Cables *
Cable length L (m) Model
0.5 XW2Z-050H-1
1.0 XW2Z-100H-1
1.5 XW2Z-150H-1
2.0 XW2Z-200H-1
3.0 XW2Z-300H-1
5.0 XW2Z-500H-1
7.0 XW2Z-700H-1
10.0 XW2Z-010H-1
1.0 XW2Z-100H-1G
1.5 XW2Z-150H-1G
2.0 XW2Z-200H-1G
3.0 XW2Z-300H-1G
5.0 XW2Z-500H-1G
Special Connecting Cables *
Cable length L (m)
Model
1.0 0.75 XW2Z-100H-2
1.5 1.25 XW2Z-150H-2
2.0 1.75 XW2Z-200H-2
3.0 2.75 XW2Z-300H-2
5.0 4.75 XW2Z-500H-2
10.0 9.75 XW2Z-010H-2
1.0 0.75 XW2Z-100H-2G
1.5 1.25 XW2Z-150H-2G
2.0 1.75 XW2Z-200H-2G
3.0 2.75 XW2Z-300H-2G
5.0 4.75 XW2Z-500H-2G
*Cable length L (m)
A
B
Green
White
CN3
CN1
CN2
(250 mm)
(500 mm)
A B
*Cable length L (m)
L
*Cable length L (m)
A
B
Yellow
Black
CN3
CN1
CN2
(250 mm)
(500 mm)
Linear lengths (not including bends)
A B
XW2Z
4
XW2Z-@@@H-3 (For CS1-series I/O Unit Connection)
*Up to two cables required for each Programmable Controller I/O Unit.
For 32-point, MIL Connector-type I/O Units for Programmable Controllers
XW2Z-@@@K
XW2Z-@@@N
XW2Z-@@@X
Special Connecting Cables *
Cable length L (m)
Model
1.0 0.75 1.0 XW2Z-100H-3
1.5 1.25 1.5 XW2Z-150H-3
2.0 1.75 2.0 XW2Z-200H-3
3.0 2.75 3.0 XW2Z-300H-3
5.0 4.75 5.0 XW2Z-500H-3
10.0 9.75 10.0 XW2Z-010H-3
Cable length L (m) * Model
0.25 XW2Z-C25K
0.5 XW2Z-C50K
1.0 XW2Z-100K
1.5 XW2Z-150K
2.0 XW2Z-200K
3.0 XW2Z-300K
5.0 XW2Z-500K
Cable length L (m) *
Model
1.0 0.75 XW2Z-100N
1.5 1.25 XW2Z-150N
2.0 1.75 XW2Z-200N
3.0 2.75 XW2Z-300N
5.0 4.75 XW2Z-500N
10.0 9.75 XW2Z-010N
15.0 14.75 XW2Z-15MN
20.0 19.75 XW2Z-20MN
Cable length L (m) * Model
0.5 XW2Z-C50X
1.0 XW2Z-100X
2.0 XW2Z-200X
3.0 XW2Z-300X
5.0 XW2Z-500X
10.0 XW2Z-010X
*Cable length L (m)
Linear lengths (not including bends)
CN4
CN1
Black
Yellow
Gray
CN2
CN3
(500 mm)
(250 mm)
(500 mm)
C
B
A
A B C
*Cable length L (m)
L
*Cable length L (m)
Linear lengths (not including bends)
CN1
CN2
CN3
(500 mm)
(250 mm)
Green
Black
B
A
A B
*Cable length L (m)
L
XW2Z
5
Ratings and Specifications
*1. Contact resistance for the Connector.
*2. Dielectric strength for the Connector.
Materials and Finish
Note: These housings, contacts, and connecting screws are made by Fujitsu.
Rated current 1 A
Rated voltage 125 VAC 24 VDC
Contact resistance 20 mΩ max. (at 20 mV, 100 mA max.) *1
Insulation resistance 100 MΩ min. (at 500 VDC)
Dielectric strength 500 VAC for 1 min (leakage current: 1 mA max.) *2
Ambient operating
temperature −25 to 80°C
Item Part name Materials and Finish
Connectors
XG4M-2030
XG4M-4030
Housing
Fiber-glass reinforced PBT resin (UL94V-0)/black
Cover
Contacts
Mating end Phosphor bronze/nickel base, 0.15-μm gold plating
Press-fit end Phosphor bronze/nickel base, 2.0-μm tin plating
XG4T-2004/4004 Strain Relief Fiber-glass reinforced PBT resin (UL94V-0)/black
FCN-367J024-AU/F *
FCN-367J040-AU/F
Housing Polyester resin (UL94V-0)/black
Contacts
Mating end Copper alloy/gold plated
Press-fit end Copper alloy/tin plated
Connecting screw Steel/nickel plated
Cable UL2464 Interface Cable AWG28 or the equivalent
Crimp terminal Forked crimp terminal 1.25 Y AS 3.5 or the equivalent
XW2Z
6
Appearance and Wiring Diagrams
XW2Z-@@@A
(For XW2D-20G6/XW2B-20G@/-40G5-T/-20G5-D/
XW2C-20G5-IN16/20G6-IO16/XW2E-20G5-IN16/
XW2F-20G7-IN16/-OUT16/XW2N-20G8-IN16)
XW2Z-@@@AU
(For XW2D-20C6)
XW2Z-@@@B (For XW2D-40G6/XW2B-40G@)
XW2Z-@@@BU (For XW2D-40C6)
For 32-point, Connector-type I/O Units for Programmable Controllers
FCN367J024-AU/F
(mating side)
XG4M-2030-T
(mating side)
Wiring Diagram
Note: Connector pins are connected 1-to-1 so
that pin numbers correspond.
Read and Understand This Catalog
Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or
comments.
Warranty and Limitations of Liability
WARRANTY
OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified)
from date of sale by OMRON.
OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR
FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS
DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED.
LIMITATIONS OF LIABILITY
OMRON SHALL NOT BE RESPonSIBLE FOR SPECIAL, INDIRECT, OR ConSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS
IN ANY WAY ConNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS baseD ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT
LIABILITY.
In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted.
IN NO EVENT SHALL OMRON BE RESPonSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS
OMRON'S ANALYSIS ConFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT
SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.
Application Considerations
SUITABILITY FOR USE
OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's
application or use of the products.
At the customer's request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the
products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product,
machine, system, or other application or use.
The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible
uses of the products, nor is it intended to imply that the uses listed may be suitable for the products:
??8??0 Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog.
??8??0 Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles,
safety equipment, and installations subject to separate industry or government regulations.
??8??0 Systems, machines, and equipment that could present a risk to life or property.
Please know and observe all prohibitions of use applicable to the products.
NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE
SYSTEM AS AWHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCTS ARE PROPERLY RATED AND
INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
PROGRAMMABLE PRODUCTS
OMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof.
Disclaimers
CHANGE IN SPECIFICATIONS
Product specifications and accessories may be changed at any time based on improvements and other reasons.
It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made.
However, some specifications of the products may be changed without any notice. When in doubt, special model numbers may be assigned to fix or
establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual
specifications of purchased products.
DIMENSIONS ANDWEIGHTS
Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown.
PERFORMANCE DATA
Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the
result of OMRON’s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON
Warranty and Limitations of Liability.
ERRORS AND OMISSIONS
The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical,
typographical, or proofreading errors, or omissions.
2012.11
In the interest of product improvement, specifications are subject to change without notice.
OMRON Corporation
Industrial Automation Company
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2012 All Right Reserved.
充足的庫存，優惠的價格,快捷的物流體系是您最佳的選擇！歡迎廣大客戶朋友來電來函垂詢，我們將竭誠為您服務！
批發市場僅提供代購諮詢服務，商品內容為廠商自行維護，若有發現不實、不合適或不正確內容，再請告知我們，查實即會請廠商修改或立即下架，謝謝。
