熨平機Flatwork Ironer
用途:
適用於熨平大型平麵形狀的棉、化纖紡織品。例如:床單、被套、餐桌佈等。具有熨燙效率高、節能、平整度好、速度調節方便、傳動平穩、安裝方便等特點,是鐵路、醫院、印染廠、賓館、飯店等單位的洗衣房的理想設備。
簡要說明:
l 第一輥采用不銹鋼烘筒,傳熱快、熱效率高、重量輕、不生銹、表麵光潔。
l 第二輥采用燙槽,在壓力下熨平,熨平效果好。
l 不銹鋼支撐輥,提高壽命。
l 加長的輸送臺更符合人機工程原理。
l 變頻調速,省電60%;采用鏈條傳動,故障率低、運行平穩、噪音低。
l 蒸汽密封旋轉接頭采用高級密封材料,延長使用壽命,減少維護。
l 先進的電氣控制系統使操作方便,維護簡單。
l 可靠的安全設計,在遇到特殊需要時能夠在機器的兩側實現緊急停機。
Use:
This machine is suitable for large cotton,textile. For example, bedsheet,bedcover,table cloth. It has high ironing-efficiency saving energy, good straight degree, speed-adjusting, stable transmission.
Short introduction:
The first roller adopt stainless steel roller, it has fast transferring-heating, high heat-efficiency, light weight, rustproof, smooth appearance.
The second roller adopt ironing-gutter, iron under pressure, so it will have perfect ironing-effect.
Stainless steel adopts support chest to improve life span.
Transmission table lengthened accord with human-machine engineering principle.
Frequency conversion speed-adjusting save 60% power, adopt chain-wheel driving, reducing break-down,stable run,low noise.
Rotary tie-in of steam-sealing adopts superior seal material, so that prolong lifespan, reduce maintenance.
Advanced wiring control-system make operation and maintenance convenient,easy.
Stable safety design can urgently carry out stop commend in accident.
主要技術參數Main parameters:
參數 Specification  | 單位 Unit  | Y-2500 ID  | Y-2800 ID  | Y-3000 ID  | Y-2500 IID  | Y-2800 IID  | Y-3000 IID  | Y-2800 IIIZ  | Y-3000 IIIZ  | 
最大熨平寬度Max Ironing Width  | mm  | 2500  | 2800  | 3000  | 2500  | 2800  | 3000  | 2800  | 3000  | 
輥筒直徑Diameter of Roll  | mm  | 800  | 800  | 800  | 800  | 800  | 800  | 800  | 800  | 
輥筒數量No of Rolls  | ____  | 1  | 1  | 1  | 2  | 2  | 2  | 3  | 3  | 
熨燙速度Ironing Speed  | m/min  | 0-9  | 0-9  | 0-9  | 0-18  | 0-18  | 0-18  | 0-25  | 0-25  | 
蒸汽壓力Steam Pressure  | MPa  | 0.3-0.6  | 0.3-0.6  | 0.3-0.6  | 0.3-0.6  | 0.3-0.6  | 0.3-0.6  | 0.3-0.6  | 0.3-0.6  | 
蒸汽管通徑Steam Pipe Diameter  | inch  | G1½"  | G1½"  | G1½"  | G1½"  | G1½"  | G1½"  | G1½"  | G1½"  | 
冷凝水接口Condensate inlet  | inch  | G1½"  | G1½"  | G1½"  | G1½"  | G1½"  | G1½"  | G1½"  | G1½"  | 
加熱方式Heating Type  | _____  | 電加熱Electricity Heating 蒸汽加熱Steam Heating  | 電加熱Electricity Heating 蒸汽加熱Steam Heating  | 電加熱Electricity Heating 蒸汽加熱Steam Heating  | 電加熱Electricity Heating 蒸汽加熱Steam Heating  | 電加熱Electricity Heating 蒸汽加熱Steam Heating  | 電加熱Electricity Heating 蒸汽加熱Steam Heating  | 電加熱Electricity Heating 蒸汽加熱Steam Heating  | 電加熱Electricity Heating 蒸汽加熱Steam Heating  | 
電制Power Supply  | v/p/Hz  | 380/3/50  | 380/3/50  | 380/3/50  | 380/3/50  | 380/3/50  | 380/3/50  | 380/3/50  | 380/3/50  | 
電機功率Motor Power  | kW  | 0.75  | 0.75  | 0.75  | 1.5  | 1.5  | 1.5  | 2.2  | 2.2  | 
每車蒸汽耗量Steam sumption of each  | kg  | 100  | 120  | 140  | 230  | 240  | 250  | 320  | 320  | 
電加熱功率Electricity heating power  | kw  | 30  | 32  | 36  | ——  | ——  | ——  | ——  | ——  | 
整機重量Machine Weight  | kg  | 2150  | 2300  | 2450  | 2950  | 3150  | 3250  | 3850  | 4050  | 
外形尺寸Dimension  | mm  | 3540* 1470* 1420  | 3840* 1470* 1420  | 4040* 1470* 1420  | 3540* 2410* 1420  | 3840* 2410* 1420  | 4040* 2410* 1420  | 3900* 3350* 1420  | 4040* 3350* 1420  | 
 


 
批發市場僅提供代購諮詢服務,商品內容為廠商自行維護,若有發現不實、不合適或不正確內容,再請告知我們,查實即會請廠商修改或立即下架,謝謝。


