CAS

ICI/英力士系列制冷劑

英力士（原ICI）制冷劑 INEOS KLEA Series RefrigerantsKLEA 134aKLEA 410AKLEA 407CKLEA 404ARefrigerants - KLEA 134a (R134a制冷劑)Widely accepted as the most appropriate alternative for R-12 over the majority of the application range for both retrofit and new equipment. A very good match to R-12 for air conditioning, high and medium temperature usage. Some low temperature (-20C to -30C) R-12 applications may benefit from the use of an HFC blend from the R407-series such as R-407D, an R-500 and low-temperature R-12 alternative. Please note that not all products are available in all markets. Refrigerant - Klea134a Physical PropertiesPropertyUnitsValueMolecular Weight-102.03Boiling Point℃ @ 1 atm-26.074Melting Point℃-103Critical Temparature℃101.03Critical Pressurebar40.56Critical Densitykg/m3508Vapour Pressure(25℃) bar6.652Latent Heat of Vaporisation at nBptkJ/kg216.77Saturated Vapour Density at nBptkg/m35.229Coeff. Vol. Therm. Exp. (LIQ,0-20℃)℃-10.002766Speed of Sound (sat. LIQ)(25℃)m/sec503Adiabatic Exponent (VAP)(25℃/2.9bar)-1.142Acentric Factor-0.3270Dielectric Constant (VAP 25℃/1atm)-1.014Dielectric Strength (R12=1)-0.5Specific Resistivity (LIQ) ACMohm.cm180Specific Resistivity (LIQ) DCMohm.cm66000Purity % WT-99.98Solubility In Water (20℃/1atm)% wt0.0773包裝：300克/支，13.6kg/瓶，100kg/瓶，1000kg/瓶。Refrigerants –KLEA 410A (R410A)A leading high pressure alternative to R-22, comprising R-32 and R-125, for air conditioning and refrigerant applications. Composition (wt%) R-32/R-125 = 50/50 Please note that not all products are available in all markets. Refrigerants - Klea410A Physical PropertiesPropertyS.I. UnitsBritish UnitsBoiling Point-51.95 (℃ @1 atm)-61.51 (°[email protected])Vapour Pressure16.66 (bara @25℃)241.6 (Psia @70°F)Critical Temperature71.0 (℃)159.8 (°F)Critical Pressure49.1 (bara)712.1 (Psia)Latent Heat Vaporisation268.0 (kJ/kg @nBpt)115.22 (Btu/lb @70°F)Coeff. Vol. Therm. Exp.0.003585 ((℃-1 0-20℃)0.002157 (°F-1 40-80°F)Saturated Vapour Density4.19 (kg/m3@nBpt)0.262 (lb/cuft @nBpt)包裝：11.3kg/瓶。Refrigerants - KLEA 407C (R407C )All of the R-407-series refrigerants are based on blends of the three HFC refrigerants R-32 (difluoromethane), R-125 (pentafluoroethane) and R-134a described above. R-407C has been formulated as a good match to the existing HCFC refrigerant R-22 for use in air conditioning, chilling and refrigeration applications and is the first of the R-22 alternatives to be used on a commercial scale. Suitable for retrofit and original equipment usage. Composition ( wt% ) R-32/R-125/R-134a = 23/25/52 Please note that not all products are available in all markets. Refrigerants - Klea407C Physical PropertiesPropertyUnitsValueBubble Point℃-44.0Dew Point℃-36.8Bubble Point Pressure (25℃)bara11.9Estimated Critical Temparature℃86Latent Heat Vaporisation (25℃)kJ/kg193.9Trouton"s ConstantkJ/kg.K1.08Coeff. Vol. Therm. Exp. (LIQ,0-20℃)℃-10.0037Density (SAT VAPOUR) at 1atmkg/m34.57包裝：13kg/瓶。Refrigerants –KLEA 404A (R404A )A long-term alternative to R-502 for retrofit and refrigeration applications. R-404A Physical Properties Composition ( wt% ) R-143a/R-125/R-134a = 44/52/4. Please note that not all products are available in all markets. Refrigerants - Klea404A Physical PropertiesPropertyUnitsValueBubble Point℃-46.9Dew Point℃-46.1Bubble Point Pressure (25℃)bara12.6Estimated Critical Temparature℃72Latent Heat Vaporisation (25℃)kJ/kg144.5Trouton"s ConstantJ/mole.K86.7Coeff. Vol. Therm. Exp. (LIQ,0-20℃)℃-10.0044Density (SAT VAPOUR) at 1atmkg/m35.39包裝：10.9kg/瓶。