插頭力矩試驗裝置：SOB-1

產品概述：本裝置用於檢測帶有插銷的直插式設備在正常使用時對插座產生的機械應力是否在規定范圍之內的設備，符合GB8898、IEC60065標準要求，增加配置也可作為螺口式燈座的扭力試驗設備。配置：2.5N及1N砝碼各1個、萬能插座（適合GB、BS插頭使用）一個、UL插座一個及澳洲插座一個。

SOB-2型：在1型的基礎上另多配1.25N砝碼一個 

 Product details: Model SOB-1
The HT Plug torque tester is for compliance is checked by engaging the device, as during intended use, with the socket-outlet of a test apparatus as shown in IEC60065 Figure 11.
A device provided with pins intended to be introduced into fixed socket-outlets shall not impose undue strain on these socket-outlets. 
The balancing arm of the test apparatus pivots about a horizontal axis through the centre lines of the contact tubes of the socket-outlet at a distance of 8 mm behind the engagement face of the socket-outlet. 
With the device not in engagement, the balancing arm is in equilibrium, the engagement face of the socket-outlet being in the vertical position. 
After the device has been engaged, the torque to be applied to the socket-outlet to maintain its engagement face in the vertical plane is determined by the position of a weight on the balancing arm. The torque shall not exceed 0.25 Nm.

新手教學

批發市場僅提供代購諮詢服務，商品內容為廠商自行維護，若有發現不實、不合適或不正確內容，再請告知我們，查實即會請廠商修改或立即下架，謝謝。