 | 產品描述 |  |
 氣液增壓泵浦
| | 這是空氣壓縮機提供高壓力的另一貢獻。DETER的高壓液體增壓泵浦，堅固耐用，不需電力，也不需連結機械驅動，它是用一低壓氣壓源加以放大、增壓，達到所需的超高壓力源的裝置。 An dedicated alternative to High Pressure Compressor, DETER Hydraulic Pressure Boost Pump are compact , require no electrical or mechanical drives connections, It is a low pressure source, then amplify, attain a kind of device in the high pressure sources. 關鍵性特點/Key Features ● No heat, flame, or spark risk. 沒有熱、火焰或火花的危險 ● No electricity consumption and machinery of heat 沒有電力的消耗及機械磨擦的熱源 ● Do not need to power, can achieve high voltage source of stress output 不需要電源即可完成超高壓的壓力源輸出 ● Without any complex control and power source, can continue for a long time and balanced pressure output 不需任何複雜的控制及動力源，可以持久且衡壓壓力的輸出 ● Long seal life and easily maintained 密封性佳壽命長，且容易維護 ● Provides 0 ~ 3000 kg/cm2 super high pressure source 可提供0~3000 kg/cm2的超高壓壓力源 ● Wide range of options and specifications. 有寬廣的樣式提供選擇 ● Applies in water, oil or special liquid 適用於水、油或特殊液體 |
PWH100系列/PWH100 Series《產品介紹 note》：PWH125系列/PWH125 Series《產品介紹 note》：產品編碼
Code No. | 活塞直徑 Piston Diameter | 倍比 Ratio | 吐出量(往返一次) Fluid volume for cycle (cc./cycle) | 耗氣量(往返一次) Consumption for cycle (L/cycle) | PWH125017 | Ø125 | 17 | 70 | 6.75 | PWH125034-D | Ø125 | 34 | 70 | 13.51 |
產品相關關鍵字：產品編碼
Code No. | 活塞直徑 Piston Diameter | 倍比 Ratio | 吐出量(往返一次) Fluid volume for cycle (cc./cycle) | 耗氣量(往返一次) Consumption for cycle (L/cycle) | PWH100011 | Ø100 | 11 | 70 | 4.17 | PWH100024 | Ø100 | 24 | 30 | 4.40 | PWH100038 | Ø100 | 38 | 20 | 4.47 | PWH100006-U | Ø100 | 6 | 62 | 4.22 | PWH100016-U | Ø100 | 16 | 24 | 4.44 | PWH100025-U | Ø100 | 25 | 15 | 4.50 | PWH100039-U | Ø100 | 39 | 10 | 4.53 | PWH100012-UD | Ø100 | 12 | 62 | 8.12 |
|
|
