現場發泡包裝
 現場發泡是采用A、B兩組化工原料混合發生化學反應後迅速膨脹、固化形成的海綿狀泡沫材料，從液體到固體整個過程發泡率高達100倍。它是做填充、固定、緩沖功能的最佳材料之一。
現場發泡包裝最大的特點
它能夠隨時、隨地根據您產品的外觀直接髮泡固化成模，達到最佳緩沖、填充保護效果。

1、將發泡液註入用薄膜鋪好的紙箱內	2、將薄膜向內折好，然後將您的產品置於其上	3、在你的產品上鋪一層薄膜，然後註入發泡液體	4、這樣您隻需20秒就完成包裝過程

Ameson® 現場發泡包裝適合哪些場合或產品包裝

1.  
   1. 產品形狀不規則、棱角多，較難采用流水線式包裝作業；
   2. 產品規格多，同規格產品數量少；
   3. 產品價值較高，產品易碎易折以及產品表麵易被刮傷；
   4. 對包裝物提出符合環保、無毒要求；
   5. 包裝物需要再回收到工廠以重復多次使用又不容易損壞、變形；
   6. 用於箱內填充時，間隙往往較不規則、有棱角或間隙較大；

使用Ameson® 現場發泡包裝的材料成本會不會很高？
不會的。我們會根據您產品的形狀、重量以及包裝測試要求，設計不同密度的發泡原料，並采用最佳的包裝方案來降低包裝成本。
另外，發泡包裝無需開模，可以幫您節省一筆不小的模具開支。
Ameson® 現場發泡包裝操及需要配的設備或工具
您隻需向我們購買或租賃電動發泡控制裝置以及AB兩組化工原料即可獨立完成發泡操作。
我們將在第一時間派專業技術人員現場培訓指導發泡的整個操作流程以及對設備的保養工作

1、預先制作簡單的木模以生產產品的發泡墊	2、將薄膜鋪到木模內再註入發泡劑	3、合身且具有緩沖性的緩沖墊就能大批量制作瞭	4、您的客戶將收到完好無損的產品

Foam Packaging
 Foam is the use of A, B two chemicals mixed rapid expansion of a chemical reaction, curing the formation of sponge-like foam material, the whole process from liquid to solid foam as high as 100 times.It is done filling, fixed, buffering function of the best materials.
The greatest feature of Foam
It can be anytime, anywher based on the appearance of your product directly into the foam curing mold, the best buffer, filling the protective effect.

    
1, the foam was injected into the carton with the film paved 2, the film folded inward, and then placed on your product 3, in the upper layer of film of your product, and then injected into the liquid foam4, so you only need 20 seconds to complete the packaging process


Ameson ® Foam Packaging for what occasion or product packaging

 
 
Product irregular in shape, angular and more difficult to use line packaging operations;
Product specifications, a small number of products with the specifications;
Higher product value, product and product friable, easy to break easily scratch the surface;
Made of environmentally friendly packaging, non-toxic requirements;
Packaging needs to return to the factory to be used repeatedly received not easy to damage, deformation;
Used to fill the box, the gap is often more irregular, angular or gaps larger;
Use Ameson ® foam packaging material costs will not be very high?
Not.We will use your product's shape, weight and packaging test requirements, the design of different density foam material, and use the best packaging solutions to reduce packaging costs.
In addition, foam packaging without a model, can help you save a small fortune in the mold costs.
Ameson ® Foam Packaging operation and distribution of equipment or tools needed
You only need to purchase or lease of our control devices and electric foam A B two sets of foam chemicals to operate independently.
We will send the first time guidance of professional and technical personnel on-site training throughout the operation process and the foam on the maintenance of equipment

    
1, pre-production of a simple wooden mold to produce the product foam pad 2, the film spread to the wooden mold and then injected into foam 3, fit and has a cushion to buffer can be produced in large quantities 4, your customerswill receive the product in good condition

新手教學

批發市場僅提供代購諮詢服務，商品內容為廠商自行維護，若有發現不實、不合適或不正確內容，再請告知我們，查實即會請廠商修改或立即下架，謝謝。