節圓直徑:266mm
模數:10
比率極限:最小2.5:1
齒寬:41mm
最大吃刀深度:19mm
齒數:20-150
specification : |
Used Hypoid Helixform Gear Finisher fitted with shuttle type Auto loader/ unloader, Auto deburring tool, Hydraulic indexing, Auto coolant turn no/off at cut position
Pitch Diameter (Max) 10 to 1 ratio:- 266mm, 2.5 to 1 ratio:- 238mm.
Diametral pitch (Coarsest) 10mod.
Extreme ratio (Minimum) 2.5:1
Face width (Maximum) 41mm
Full depth 19mm
Number of Teeth 20-150
Diameter taper hole at large end 3 27/64 inch
Taper per foot 1/2 inch
Depth of taper 5/8 inch
Main Motor 3HP 1500rpm,
Hydraulic Motor 3HP 1500 rpm
Coolant motor 1HP 1500rpm
Magnetic chip separator 1/8HP 1500 rpm
另外,本公司常年提供各種國內外各種大中小型進口機床,種類包括 |
批發市場僅提供代購諮詢服務,商品內容為廠商自行維護,若有發現不實、不合適或不正確內容,再請告知我們,查實即會請廠商修改或立即下架,謝謝。