應用於金銀飾品的補孔、點焊砂眼、修補縫紋及鑲嵌部件爪腳部位等焊接。也可用於假牙補砂眼及微小精密零件如電池鎳帶、集成電路引線、鐘表遊絲、顯象管、電子槍組裝等領域的焊接。焊接過程熱影響區小；焊斑大小可隨意調整；焊點精細、平整、美觀，無需過多的焊後處理；可精確定位；焊接速度快、質量高、焊點無污染、高效環保。可適用金、銀、鉑金、不銹鋼、鈦等多種金屬及其合金。
二，產品亮點：
1，一鍵操作：一鍵開關，簡化設備啟動過程，方便操作者繁瑣的使用過程。
2，單片機控制調節：可存儲50組常用焊接參數，方便再次使用。
3，體積小巧重量輕：減小工作空間，便於運輸和搬移。
三，產品細節：
主要配置 | 泵浦源、激光脈沖電源、顯微鏡、專業控制系統 |
外部供電 | 220V/50Hz/25A/1P |
整機電功率 | ≤4.5KW |
激光輸出功率 | ≤60W |
激光波長 | 1064nm |
激光頻率 | 1-50Hz |
激光脈寬 | 1-5ms |
激光斑點直徑 | 0.1-2mm |
觀察倍率 | 10倍 |
加工距離 | 90mm |
主機外型尺寸 | 840mm(L)X450mm(W)X500mm(H) |
整機凈重量 | 40Kg |
使用環境 | 潔凈無塵，無震源，13℃-28℃，濕度5%-75% |
耗材 | 水、電、燈泵 |
Applications：
Common usage in DKLW-60W include: ring sizing, retipping prongs, repairing bezel setting, assembling necklace, bracelets, eye glass frames, stainless steel jewellery, filling porosity, repairing worn up mould insert, dental laboratory etc…
DKLW-60Wis such an incredible tool that gives you an excellent result on welding and patching work that our customers have been full of praises for it risk free repair.
The amazing and easy-to-use tool instantly produces a burst of hot light energy with pinpoint accuracy. The sharply focused light beam melts only a very small area of metal and thus transfer small amount of heat to the other parts of the object. It minimizes the potential hazard of heat damage. You no longer need to disassemble the piece, unset the stone, perform the repair, and then reset the stone. The DKLW-60W lets you quickly weld the piece with hot light while holding it in your hand. This bench top model designed with single laser lamps, the small dimension, light weight will save more working area and much easy for shipping, the imported main parts of the machine provides long life usage and low maintenance.
Technical Specification：
Maximum Peak Power :≦4.5 KW
Average Pulse Energy :≦60W
Laser Safety Class : Class 4
Wave Length : 1064 nm
Pulse Length : 1-5 ms
Pulse Frequency : 1-5 Hz
Spot diameter : 0.1mm – 2.0mm
Working distance : 90mm
Program memory : 50 programs
Flash lamp : Single
Laser Cooling System : internal Water Chiller
Power Supply : 220V (+/-10%) 50HZ / 25Amp / 1 phase
Dimension (Main) : 840mm(L)X 450mm(W)X 500mm (H)
Net Weight (Main) : 40Kg
Working requirement : Clean, no dust and vibrate, Temp. :13℃-28℃, Humidity: 5%-75%
批發市場僅提供代購諮詢服務，商品內容為廠商自行維護，若有發現不實、不合適或不正確內容，再請告知我們，查實即會請廠商修改或立即下架，謝謝。
