電源線彎曲試驗機FL-1
Flexing Test Swivel Machine FL-1
產品概述：本裝置符合GB2099.1-2008圖21、UL817、VDE0620、IEC884.1圖21等標準要求，用於考核不可拆線電源插頭（或端子）的耐彎曲性能，檢驗電源插頭端子的牢固程度。
彎曲角度：左右各45°、60°、90°（或180°）；
彎曲速率：10～60rpm（速度可調）；
負載砝碼：20N、10N、500g、284g、113g（或制訂）；
試驗次數：可按標準要求預置(六位顯示)；
測試工位：6工位。
Products Information
Product details: ModelFL-1
TheFL-1Plug Cord Flexibility Tester can test six cables or cords fitted with plugs simultaneously. This improves testing capacity. IEC 60884-1 calls for 10,000 flexing at a rate of 60 flexing per minute. Halfway through the test, the cords need to be rotated 90°. The plug sockets are designed to make this rotation easy and accurate. The HT Tester has individual station counters so that any failure data can be retrieved by station.
The cables are connected to a socket and the tail of the cable is connected to the tester to detect if an internal fault occurs with the cable wiring or accessory connection.
The instrument starts in a vertical orientation and then flexes the specimens 45° on either side of the vertical for a total 90° of flexing. A standard rate of 60 flexing per minute is used but a slower rate can be selected if desired.
A set of customer selected weights are included with the instrument so that the proper force can be applied to the cable during the test.
Power Supply | 220V 50Hz or 115V 60Hz |
Number of Flex Per Test | 1-999999 (selectable) |
Number of Test Station | 6,lndividual counts for each station |
Rate of Flexing | 10~60 times/min(selectable) |
Flexing Angle | Swivel angle on either side for 45° , 60°, or 90°(or 180°)(selectable) |
Weight | 10N/20N/133g/284g/500g*6(selectable) |
Dimensions | W*D*H=100cm *50cm* 112cm |
Conforms to standard | IEC884-1 Figure 21 and clause 23.4,IEC320-1,VDE0620 |
批發市場僅提供代購諮詢服務，商品內容為廠商自行維護，若有發現不實、不合適或不正確內容，再請告知我們，查實即會請廠商修改或立即下架，謝謝。
