1.時間/日歷功能；
2.每日鬧鈴功能。
3.秒表功能，1/100秒。
4.定時倒數器功能，10時。 
5.步進節拍器功能。 
6.多道功能：10道， 30道. 60道. 99道。

-STOPWATCH -

     Features:

l          Three line digit display.        Pre-set count-down time

l          Multiple memories ability.      LAP&SPLIT time display

l          12/24-hr.formats for option.     Daily alarm.      1/100sec. precision

       LCD Display

       Stopwatch Function

l          PressMODE switch to selec stopwatch mode.“LAP”,“SPLIT”,and   “CHRONO” will appear at the middle left.

l          Press selec switch to start timing

l          PressSETswitch and the first LAP will be displayed on the top line. The first SPLIT time will be displayed on the middle line, and the continuous timing will be displayed at the top left corner of the screen.

l          Press SET switch successively and the sequential LAP time and SPLIT time will be displayed.

l          Press selec switch to stop the timing.

l          PressRECALLswitch to retrieve the fastest(FS) LAP time.

l          PressRECALLswitch again to retrieve the slowest(SL) LAP time.

l          PressRECALLswitch once more to retrieve the average(AV) LAP time.

Note: If the number of LAP time is >100 or LAP/SPLIT time is longer than 10 hours, the fastest (FS), slowest(SL) and the average(AV) LAP time function will fail to be shown.

l        Press selec switch to retrieve first LAP time,“RECALL”will appear under“CHRONO”. 

l        Press selec switch to retrieve sequential LAP time and SPLIT time, or pressMODE switch back to the state wher the stopwatch stops. 

Note:   PressSELECT switch successively, the number of sequential LAP time is shown from first to last.

Press selec switch successively, the number of sequential LAP time is shown from last to first.

l        Press RECALLswitch to the state wher the stopwatch stops, pressSELECT switch to continue the former timing, or pressSETswitch to reset to zero. 

Note: After all the digits become zero, press selec switch to restart a new timing, or pressMODE switch to retrieve the fastest(FS), slowest(SL), and average(AV)time once more. After pressingMODE switch, pressSELECT/SETswitch, then the sequential LAP/SPLIT time will be retrieved again

                       Count-down Function

l      Press MODE switch to selec count-down mode.  “TR” will be at the top left corner. 

l        PressRECALLswitch for two seconds, then the digit of hour will blink. 

l        PressSETswitch to selec the digits. Each press ofSELECT switch will increase number. 

l        PressRECALLswitch to complete the pre-setting time while the digits of the bottom line still remain “0000”. 

l        Press selec switch to start count-down. 

l        PressSELECT switch to stop count-down. 

Note: When the digits in the middle line become zero, if the pre-setting time is 1 min. or above, the stopwatch will beep about 15 seconds; if the pre-setting time is between 1 min. and 11sec. , the stopwatch will beep twice; if the pre-setting time is <11 sec. , the stopwatch will beep once. After the beep, the digits at the bottom line will be added 1, then the timer starts working again immediately.

Pacer      

l        PressMODE switch to selec pace mode, then “pace” will appear at the top line. And the two digits at the bottom line will blink. PressSELECTswitch and the following number will be available for selection: 10,20,30,40,60,80,120,160,240,320.

l        PressSELECT switch to start pace timing. For example, if a number of 320 is set, there comes 320 times of “beep” per minute. Total time is shown at the top line, the times of beep are shown in the middle line and the bottom line shows the selected.

l        PressSELECT switch to stop pacer.

l        PressMODE switch to reset to zero.

Note: If pressMODE switch when pacer is working, pacer will stop and memories will be deleted automatically.

       Auto-calendar

lPressMODE switch to selec calendar display mode. “TH” will be at the top left corner.

lPressRECALLswitch for two seconds, the digits of “year” will blink.

lPressSTEswitch to selec the digits. Each press ofSELECT switch will increase number.

lPressRECALLswitch to complete the adjustment

lAlarm

PressMODE switch to selec alarm mode. “AL” will be at the top left corner.

l        PressRECALLswitch for two seconds, the digits of “hour” will blink.

l        PressSETswitch to selec the digits.

l        Press selec switch to set the alarming time.

l        PressRECALLswitch to complete the alarm setting.

Note: A. The stopwatch will automatically beep for 15 sec. when it is alarm setting time.

     B. In alarm mode, pressSELECT switch to turn on or turn off the alarming function. “on” will be displayed at the down right corner when it is turned on; “- -” will be displayed at the down right corner when it is turn off.