LEAD-FREE SOLDER PASTE

BL-600有鉛助焊膏

（無配方生產高品質錫膏方案）

說 明 書

BL-900有鉛助焊膏，是專用於生產SMT有鉛錫膏，完全替代國產助焊膏不足的焊接活性助焊膏，採用日本優級原材料研製合成，製作產品可以滿足客戶不同產品的工藝要求,適用生產各種合金粉焊錫膏見(表1)

BL-506 lead-free solder paste is a dedicated lead-free solder paste on the SMT production process welding activity to help paste, using superior grade Japanese development of synthetic materials to produce products to meet customer process requirements of different products suitable for producing all kinds of alloy powder paste, see(Table 1)

一、產品特性：

1：本產品是免清洗焊膏，殘留很少，無需清洗。
2：殘留物是無色透明的,快幹不粘手,較高的絕緣阻抗,不會腐蝕PCB。
3：優良印刷優良的性能，適用於手工和機器印刷。
4：連續印刷性能穩定，其粘度變化極小,鋼網上操作壽命可長達8小時,保持良好的印刷性能。
5：可適用不同檔次的焊接設備要求,在較寬的回流焊爐內表現良好的焊接性能。
6：能夠適應0.3mm間距印刷要求。
7：良好的潤濕性能，有效解決冷焊點等不良現象。
8：濕度曲線的技術，減少對各種曲線的依賴。
9：焊後殘留極少極少腐蝕錫珠。
10：錫點，光澤度好，強度高，良好的電氣性能。
11：尤其是柔性電路，預熱時間可能很短，,都可達到優良的焊接效果。

12：本焊膏生產的成品,濕潤性好,抗發乾性和防冷熱塌陷極好。

1, the product features:
1: This product is no-clean solder paste, very little residue, no cleaning.
2: The residue is colorless and transparent, quick-drying non-stick in hand, high insulation resistance, corrosion will not be PCB.
3: fine print excellent performance, suitable for hand and machine printing.
4: Continuous printing performance is stable, its viscosity changes very little, the steel line operating life of up to 8 hours, and maintain good printing performance.
5: applicable to different grades of welding equipment requirements, the performance of a wide reflow furnace good welding performance.
6: able to adapt to 0.3mm pitch printing requirements.
7: good wetting properties, an effective solution to cold solder joints and other undesirable phenomena.
8: humidity curve technology to reduce dependence on the various curves.
9: very little very little corrosion after welding residual solder ball.
10: tin point, good gloss, high strength, good electrical performance.
11: in particular, flexible circuits, preheating time may be very short, can achieve good welding effect.
12: The production of finished paste, moist and good, anti-hair dry and anti-collapse excellent hot and cold.

二、合金粉配比

(表1)

三、使用/注意

1、焊膏保存溫度在常溫5-20℃，勿接近高溫處。

2、使用前將焊膏攪拌均勻，倒入合金粉攪拌。

3、攪拌時間根據合金粉份量來定，參考時間:（攪拌機攪拌5-12分鐘）.

4、攪拌溫度控制20-25℃，在攪拌過程中合金粉磨擦會產生溫度會上升，注意觀查合金粉變化。

5、手工攪拌要在乾燥空氣中操作，使用不銹鋼材料攪拌。勿使用其它金屬成份接觸錫膏。

Third, use / attention

1, paste stored at room temperature, the temperature 5-20℃, not to close to heat.
2 Stir before using the paste, stirring into the alloy powder.
3, stirring time under the weight of alloy powder to set, reference time: (Mixer 5-12 minutes).
4, mixing temperature control 20-25℃, the alloy powder in the mixing process will produce friction between the temperature will rise, pay attention to changes in view of investigation alloy powder.
5, hand mixing in dry air to operate, so that stainless steel mixing.Do not use the other metal components contact solder paste.

免費提供技術支持：13798809800

QQ: 422530988

焊豐電子材料有限公司：
批發：SMT紅膠 富士紅膠
BGA焊膏 無鹵焊膏
生產錫膏專用：
無鉛焊膏BL-900 (錫膏生產-免費技術支持)
本焊膏採用全進口材料配製，專用於生產的錫膏專用。
特點：
1.無異味，錫點光亮，光滑，殘留極少，殘留物是白色透明，
2.鍍金，鍍鎳板都可以使用，無連錫現象,適用於高精密SMT電路焊接。
3.無錫珠，抗發乾性極好，保濕性能極強。可操作24小時正常
聯繫人：方生
手機：13798809800
Q Q: 422530988

新手教學

批發市場僅提供代購諮詢服務，商品內容為廠商自行維護，若有發現不實、不合適或不正確內容，再請告知我們，查實即會請廠商修改或立即下架，謝謝。