Convex dressing range:0.8R-40R
Convex dressing range:0-40R
Max. wheel dressing diameter:250mm
Max. wheel extending diameter:375mm |
| ● | Positive setting of the diamond to absolute center with the special gage included with the dresser. |
| ● | Simple,fast,accurate radius setting; no height gage or other set-up aids required. Radius is set on the ginder by measuring over the two pins or by inserting a gage block,as shown, for direct reading. Inside or outside radius is determined simply by sliding the dowel pin to the right for concave and to the left for convex. |
| ● | 4×90° gaduation in full 360° circle. 6 Minute vernier reading. Chrome plated. |
| ● | One push-pull type knob for radius and angle control and for safer and faster operations. |
| ● | ACCURACY. Exteremely close tolerances are held in the manufacture of this tool, assured by hardening and precision grinding of all critical parts. Ways are chrome hardened. |
| ● | ECONOMY. Set-up and dressing time reduced to a bare minimum due to simplicity. |
| ● | N.W.:10.5kg |
