臺灣鷹牌代理商供應HV-6臺灣鷹牌橫立兩用分度盤銑床立臥分度盤_分度盤、分度頭_機床附件_機械設備_貨源

VERTEX Horizontal,Vertical Rotary Table,HV-6,8,10,12,14,16,WITH face plate

1.	Our Tables are made of high density Meehanite and use "HEIDENHAIN" electronic equipment to inspect angle to assure the excellent quality and durableness.
2.	Use excellent machining center to process. Spindle end be applied accuracy bearing. Can be assured to keep very steady under load cutting.
3.	Worm is hardened and ground. The ratio is 90:1. The work table is graduateda full 360° so that one turn of the handle moves the table through 4°. Micro collar is graduated in steps of 1'min. And vernier scale makes settings down to 10 seconds possible.
4.	These Rotary Tables are popular for their excellent perfor-mance, practical design and reasonable cost. They are widely used for circular cutting work, angle setting, boring, spot-facing and similar work.
5.	Using the Key guide block, the center can be corrected quickly and accurately.

ITEM NO.	TESTING OBJECTIVE	VARIATION(INCHES)(MM) MAXIMUM TESTED
1	FLATNESS OF CLAMPING SURFACE(CONCAVE)	.0006(0.015)
2	PARALLELISM OF CLAMPING SURFACE TO base	.0008(0.0.02)
3	SQUARENESS OF CLAMPING SURFACE TO ANGLE FACE	.0008(0.0.02)
4	TRUE RUNNING OF CLAMPING SURFACE	.0006(0.015)
5	TURE RUNNING OF CENTER HOLE MEASURED AT HOLE EDGE	.0008(0.0.02)
6	INDEXING ACCURACY OF DIRECT INDEXING MECHANISM MAXIMUM CUMULATIVE SPACING ERROR	45"

ORDER NO.	Table			base dimension			Bolt slots	The Load Capacity For Rotary Table		Center sleeve	Gross Weight kg/lb
	Outer diamensions		Height	base dimension			Bolt slots	The Load Capacity For Rotary Table
	A1	D	H	H1	A	B	g	Horizontal	Vertical
HV-4	70	110	80	85	145	115	12	35KGS	18KGS	MT-2	(C)7.5
HV-6	78 3.07	150 5.91	80 3.11	100 3.94	200 7.87	160 6.30	15 0.59	40KGS	20KGS	MT-2	(C)13
HV-8	100 3.94	200 7.87	105 4.13	135 5.31	265 10.43	220 8.66	17 0.67	80KGS	40KGS	MT-3	(C)26
HV-10	110 4.33	250 9.84	115 4.53	165 6.50	325 12.80	280 11.02	17 0.67	90KGS	50KGS	MT-3	(C)37
HV-12	130 5.12	300 11.81	135 5.32	195 7.68	388 15.27	330 12.99	18 0.71	120KGS	60KGS	MT-4	(C)70
HV-14	150 5.12	350 13.78	140 5.51	230 9.03	450 17.72	380 14.95	18 0.71	130KGS	70KGS	MT-4	(C)92
HV-16	150 5.90	406 15.98	155 6.10	255 10.03	500 16.69	430 16.93	18 0.71	140KGS	60KGS	MT-4	(C)122