Product Overview:
Jaw crusher, with a crushing ratio, even granularity, simple structure, reliable operation, easy maintenance, operating cost and so on.Jaw Crusher is widely used in mining, smelting, building material, highway, railway, water conservancy and chemical industry and many other sectors, not more than 320 MPa breaking strength of various materials.
Jaw Crusher - also known as the tiger population.Because of this crusher structure is simple, reliable, so widely used.It is used in crushing the hard and medium hard materials.In the concentrator, the more broken and in pieces as a crude device.
Jaw crusher ore process, adding to the jaw crusher chamber (from the fixed jaw plate and movable jaw plate composed of space) in the material for the movable jaw plate will swing back and forth periodically, when the movable jaw plate nearthe fixed jaw plate, the materials are crushed, split, and the role of bending and breaking is broken.When the movable jaw plate will leave the fixed jaw plate, has been broken to the port of discharge less than the size of the material, by its weight from the lower discharge port of discharge.Has not been broken in the crushing chamber to the upper part of the material is small enough, followed by drops to the bottom of the crushing chamber, once again under the action of jaw plates continue to be broken.
Product structure and material quality:
1 - frame; 2 - the fixed jaw plate; 3 - active jaw plate;
4 - fixed jaw; 5 - eccentric shaft; 6 - toggle plate; 7. Adjustment Block
Simple swing jaw crusher is mainly supported by the rack and equipment, crushing of the working body, transmission, safety device and the port of discharge devices, adjustment of several parts.
Complex swing jaw crusher is mainly used in the broken ore.However, in medium and small processing plant, also as a first crushing equipment, the mine mouth to the width of up to 900mm, the width of discharge port 10-150mm, the production rate of 1-450t / h.The crushing machine is moving jaw hanging eccentric shaft axis, combined rod and the moving jaw.Movable jaw plate directly through the ball hanging in the eccentric shaft, eccentric shaft supported on two ball bearings in the rack, the port of discharge with a wedge to adjust the size, its only one bracket, lining were installed in themovable jaw and fixed jaw on the surface is curved.Other parts and simple swing jaw crushing machine similar.When the eccentric shaft rotates, the trajectory is moving round the upper jaw, while the bottom was oval track.It is called complex swing.Apart from the role of ore crushed it, there are grinding peel effect.Therefore, higher productivity, less energy consumption.However, over crushed ore is severe, liner wear fairly quickly.
Products should be scope:
This series of crusher is mainly used in metallurgy, mining, chemical, cement, construction, refractories and ceramics and other industrial sectors for the broken and the crushing of hard ores and rocks of various purposes.
This series of crushers crushing compression strength is not best suited to a variety of hard and soft ore than 300MPa, the maximum block was broken material shall be not greater than the required technical parameters
Tel: 13766329500 Mr Xu
批發市場僅提供代購諮詢服務，商品內容為廠商自行維護，若有發現不實、不合適或不正確內容，再請告知我們，查實即會請廠商修改或立即下架，謝謝。
