貝貝康科技是國內唯一一傢擁有一批高科技人員開發、研制、創新及生產銷售為一體的企業。公司研制開發的氮氣彈簧是采用國際標準，引進消化吸收國外先進技術基礎上自行研制開發的產品，並在制造技術上獲得幾項國傢專利。

 我司位於珠三角洲腹地-----東莞，這裡與廣州、佛山、中山及深圳接壤，毗經濟紐帶珠海、港澳區。交通便利、地理位置得天獨厚。擁有配套設施齊全的大型生產基地和技術研發中心。技術力量雄厚、生產工藝嚴謹、采用流水線作業和先進的檢測系統。產品質量可靠，品種規格齊全，價格合理。

我司自成立致今，已有10多年的歷程，始終以“精益求精，高質量，誠信服務”為理念。嚴抓內部管理，以質量創名品牌，以創新謀發展，以規模求效益。

本公司銷售網絡到達全國各地，同時不斷引進新技術、與國內高等科技院校合作、采用新材料、新工藝。利用先進的生產設備和嚴謹的工藝流程，使產品質量更高、性能更可靠。我們始終堅持以科技為先導，致力於模具專用氮氣彈簧領域為客戶提供最優質的產品和最佳的售前、售中、售後服務。

我司所生產的模具專用氮氣彈簧品牌為：勁霸----JINBA GAS SPRINGS

一．氮氣彈簧特點：

     1.經久耐用：

本產品活塞桿經過精密加工，耐磨性好，表麵粗糙度在Ra0.02um以下，硬度高，優質的活塞桿和高性能密封裝置，保證瞭氮氣彈簧的長期壽命。產品已經國傢汽車質量監督中心檢測，質量合格，在完成有效行程後，減壓率在5%以下，完全附合國際標準。

2.可降低成本

該氮氣彈簧的具有體積小，彈力大，壽命長，彈壓力恒定的特點。體積小可節約模具空間，彈力大可減少彈簧數量，壽命長可減少模具維修次數，因此降低瞭模具的總成本。

3..絕對安全：

該產品與其它產品采用的管材焊接成型方式相比，本公司采用整體切削成型方式，確保瞭產品的安全可靠。

二.氮氣彈簧產品的類型

主要有BKB/J/C/H 四種,分為國際和本公司自制結構緊湊型。其它技術參數相同

1.ISO標準氮氣彈簧BKB450~100000N 分為小、中、大型。

2.結構緊湊型： BKJ1700~100000N

3．結構特緊湊型： BKC2500N~100000N

4．結構特長型：   BKH5000N~180KN

以上列出的模具專用氮氣彈簧是最典型的常用品種(特別是汽車模具行業),基本上能滿足各種不同類型模具的需要.ISO標準型是完全符合ISO11901氮氣彈簧國際標準,與國外同類產品,如瑞典Kaller美國DadcoHyson等等,均具有完全的互換性。

同樣的質量，價格比同類國外產品的價格少30%—50%

200萬次或兩年內免費保修，終生維護。

英文版

This company is domestic only 11 voluntarily researches and develops,the design, the production, the sale is a body. The company developsthe development the nitrogen spring is uses the internationalstandard, in the introduction digestion absorption overseas advancedtechnology base independently develops the development the product,and obtains several item of national monopolies in the manufacturetechnology.

一. nitrogen springs characteristic:

1. Durable:

This product connecting rod passes through the preciseprocessing, the resistance to wear good, the surface roughness belowRa0.02um, degree of hardness is high, the high quality connecting rodand the high performance packing assembly, has guaranteed the nitrogenspring long-term life. The product already the national automobilequality surveillance center examination, the quality was qualified,after completed the effective travelling schedule, the reducedpressure rate below 5%, completely coincided the internationalstandard.

2. May reduce the cost
This nitrogen spring has the volume slightly, tension big, thelife is long, shoots the pressure constant characteristic. The volumesmall may save the mold space, the tension greatly may reduce thespring quantity, the life is long may reduce the mold service numberof times, therefore reduced the mold total cost.

3. Absolutely safe:
This product the tubing welding which uses with other products takesshape the way to compare, this company uses the whole cutting to takeshape the way, guaranteed the product security to be reliable.

二. Nitrogen spring product type

Main BKB / J / C / H are divided into international and structure of the Company homemade compact. Other technical parameters of the same

1.ISO standard nitrogen springBKB150~100000N divides intoslightly, center, is big.

2. The structure is compact:BKJ1700~75000N

3. Structure special compact:BKC2500N ~ 75000N
4. Structure long-:BKH5000N ~ 120KN

Above lists the mold special-purpose nitrogen spring is themost typical commonly used variety (specially is automobile moldprofession), basically can satisfy each kind of different type moldthe need ISO standard type completely conforms to the ISO11901nitrogen spring international standard, with the overseas similarproduct, like Sweden Kaller American DadcoHyson and so on, has thecomplete interchangeability.

The same quality, price than the price of similar foreign products less 30% -50%

新手教學

批發市場僅提供代購諮詢服務，商品內容為廠商自行維護，若有發現不實、不合適或不正確內容，再請告知我們，查實即會請廠商修改或立即下架，謝謝。