ng>用 途ng>

APPLICATIon

◆MEC 210為用於金屬切削加工的水溶性乳化切削油，適用於各種普通切削加工。

◆MEC 210 is a fully formulated soluble oil designed to provide good performance in a wide range of general machining operations。

◆MEC 810適用於重負荷強力切削加工，包括從輕至重負荷之車、磨、銑、刨、鉆、鋸、攻絲及拉削等均可選用。對不銹鋼、合金鋼等難加工材料更為合適。

◆MEC 810 suitable for various cutting of heavy duty, including turning, grinding, milling, planning and drilling, especially can be used for light to heavy duty of ferrous metals。Hard machining material like stainless steel and alloy steel。

ng>特 性ng>

SPECIAL PROPERTIES

◆MEC 210/810乳化切削油加有多種極壓、防銹、乳化添加劑，潤滑、冷卻、清洗、防銹防腐蝕性良好，有較長的使用壽命。

◆MEC 210/810 contain high levels of effective additives for extreme pressure, anti-rust and emulsion, have premium lubricating, cooling, cleaning and anti-rust, anti-corrosion propertice。

◆穩定性良好，不易發臭。

◆Good stability and low smell tendency。

◆價格低廉又能延長刀具壽命，節省加工費用。

◆Prolong tool life for major savings in tool costs at a relatively low cost。

ng>使用說明ng>

EXPLAIN FOR USE

◆按如下比例用水稀釋後使用：

◆Dilute by water as following ratio for used：

√車、鉆、弓鋸削、銑削                     1：20

√Cutting, drilling, milling, bow sawing           1：20

√帶鋸機鋸削、攻絲、拉削                  1：10

√Band sawing, screwing, drawing              1：10

√磨削                                   1：25-30

√Grinding                                 1：25-30

ng>典型數據ng>

TYPICAL DATA

產 品 名 稱

外   觀

PH  值

（5%乳液）

5%乳液安定性

（15-35℃）

最大無卡咬負荷（PB）

N（kgf）/(5%乳液)

KANUO MEC 210

深棕色油液

7.5-8.5

合格

-

KANUO MEC 810

深棕色油液

7.5-8.5

合格

≥686(70)