超音波測距機具有以下功能:

1.移動測距功能;

2.可自動計算麵積與體積;

3.輕便,容易使用與攜帶;

4.準確到小數點後2位;

5.自動關機功能;6.低電顯示功能，測試距離為20M

包裝：雙麵吸塑

規格：
電池：1個9V的電池。（不包括）
測量機的單位是英尺和米。
精確度：0.005+1
頻率：40千赫
測量范圍：0.45到18.0米

ng style="font-weight: bold;">CP-3007 Ultrasonic Distance Measurer OWNER’S MANUALng>

PREPARATIon

INSTALLING BATTERIES

Your measurer requires 9V battery (not supply) for power. For the best performance and life, we recommend alkaline battery.

Follow these steps to install a battery.

ng style="font-weight: bold;">Cautionng>: If you do not plan to use the measurer for a month or more, remove the battery, Batteries can leak chemicals that can destroy electronic parts.

ng style="font-weight: bold;">STABILIZING THE MEASURERng>

Your measurer is sensitive to changes in temperature and humidity. Before you use the measurer, wait about 15~30 minutes for it to stabilize to the current room’s temperature.

OPERATIon

ng style="font-weight: bold;">TURNING The MEASURER on/OFFng>

To turn on the measurer, pressng style="font-weight: bold;">MEASURERng>. The measurer turns itself off if no key is pressed within about 1 minute.

TAKING A MEASUREMENT

ng style="font-weight: bold;">Notesng>:

The measurement appears for about 1 minute (or longer if you press another key)

ERROR might appear if you try to measure a distance shorter than the range of 1.5 feet (0.45m) or longer than 60 feet (18.0meters)

Measuring Tips

Some type of curtains and blinds can absorb sound waves.

Causing measurements to be inaccurate. If you are measuring distances in a room with curtains. open the curtains before measuring the distance to a window behind them. Also, be sure that the window is closed.

If there is not clear path between the points where you are measuring. you might receive a false reading from sound waves bouncing off objects such as chairs, tables and objects with uneven surfaces. If you are not sure if a measurement is correct, move slightly to one side then measure the distance again.

If the surface of a wall you are measuring is not sold and flat, or if you are measuring in a narrow corridor. You might receive a false reading .if this happens, use a sold surface to measure or move to the center of the corridor.

To measure a distance longer than 60 feet (18.288 meters) selec a point in the middle of the room (for example) measure from the center of the room toward each side. then add the two measurements.

SAVING A MEASUREMENT

ng style="font-weight: bold;">Note: Data of AREA or VOLUME can not be savedng>.

CALCULATING VOLUME

To find the volume of a room, Measure the height. Width and the length of the room and store each measurement in a different memory location (see “Saving a Measurement”). Then pressng style="font-weight: bold;">VOLUME,ng>The volume calculation result appear.

CALCULATIon AREA

Follow these steps to find the area of any two stored measurements

ADDING/SUBSTRACTING STORED MEASUREMENTS

USING LASER

To have a laser pointer, pressng style="font-weight: bold;">LASERng>. The laser pointer disappears automatically after about five seconds

USING BACKLIGHT

You can light up the display screen with the “ng style="font-weight: bold;">LIGHTng>” key for easy viewing, even in a dimly lit area.

SPECIFICATIonS

Power 1x9V

Unit of measurement Feet or Meters

Accuracy 0.5%+1 digit (8~60ft)

Working Frequency 40kHz

Working Temperature 32” to 109.4” F(0” to 43” C)

Range 1.5 to 60 ft (0.45 to 180288m)

Specifications are typical; individual units might vary.

Specifications are subject to change and improvement without notice.

Caution:

The laser emitted from the unit is visible laser of 650nm wavelength

Don’t stare into the laser beam and also don’t shoot laser beam to any other’s eyes.

Class II laser product Output < 1 mw

Notes:

The product has passed EN60825-1

Corresponding label is affixed on the back of the unit.

+

新手教學

批發市場僅提供代購諮詢服務，商品內容為廠商自行維護，若有發現不實、不合適或不正確內容，再請告知我們，查實即會請廠商修改或立即下架，謝謝。