UV能量計/測曝光機專用/UV-int150/UV-DESIGE uv能量計_光學計量標準器具_計量標準器具_儀器、儀表_貨源

加工定制：否	品牌：其他	型號：UV150
測量范圍：UV-int150

產品圖片

nt size="4">產品介紹nt>

nt face="Verdana" size="4">產地：原裝德國UV-Mess-undSystemtechnik(UV-DESIGE)　nt>

nt face="Verdana" size="4">nt>

nt style="BACKGROUND-COLOR: #ff0000">nt size="5">註nt size="+0">：現國內市場上有假冒偽劣產品！nt>nt>nt>

nt size="5" style="BACKGROUND-COLOR: #ff0000">nt>

nt face="Arial, sans-serif">nt color="#505050" face="Arial, sans-serif">nt color="#000000" size="4">適用於生產：手機外殼，PCB,UV板，地板，塑膠按鍵...nt>nt>nt>

nt color="#000000" size="4">相關工藝與材料：UV噴塗，UV上光，UV印刷，UV膠，UV塗料油墨...nt>

nt size="4">UV能量計( UV-int150 ): UV-int150標準型UV能量計是一種高質量的UV能量測量機。UV能量計是用於測量UV固化裝置的UV能量的一種機器，測量機的主感器在測量機的背麵，測量范圍為250~410納米，測量時可直接顯示於能量計正麵的顯示屏上讀出（單位：毫焦耳/平方厘米），該能量計的電源為3.6伏特的鋰電池，該電池由於使用瞭特別的能源節省線路，該電池可持續大約10000小時。nt>

nt size="4">nt>

nt size="4">The UV-Integrator 150 is a high quality UV measuring instrument. It is used to measure UV energy of
different light sources, especially on printing machines. It is ideal to ensure quality control of printing and
UV drying processes.
Small size, heavy duty pass-through Integrator with a diameter of 90 mm. It is reliable and simple to use.nt>

產品特點

nt size="4">

nt size="2">nt>

nt>nt size="4">

nt>

nt size="4">安裝/操作
a．打開on開關，則LCD（顯示屏）是顯示為零。
b．將能量計放置於UV燈燈源附近，盡量做到以其背麵對準燈源（因能量計的能量感受器在背麵），照射時間作適當延長。
c．直到能量計的顯示屏上有測量顯示，例如1,000毫焦耳/平方厘米。(1000mj/cm2)
d．關掉能量計開關(OFF)，或將顯示屏的值設置為零。nt>

nt size="4">nt>

nt size="4">In order to keep its full function and precision it is recommended to have re-calibration done once per
year. Re-calibration will also be necessary after change of battery.nt>

機器規格ng>ng>

nt size="4">

測試范圍：0-5000mw/cm2

顯示 6個字數值液晶：0-999999mj/cm2

尺寸直徑：90mm 高：12mm

光譜測量范圍 250-410納米

受熱最高溫度 110 C

開關 on/OFF檔重量約150克

電源 3.6伏特鋰電池套殼鋁制

電功率 100pa可使用1萬小時

nt size="2">nt>

註意事項：勿直視或非直視即通過折射/反射UV燈，保證身體的任何部位均不受UV燈直射。

nt size="2">nt size="4">本UV能量計能承受較高的溫度,在輸送帶上不超過10秒,耐溫110℃.nt>
nt>

本產品自購買日起保修一年!

nt>

nt size="4">nt>

nt size="4">Technical Data:
Spectral range: UV 250 – 410 nm
Measuring range: 0 to 5,000 mW/cm2
Display: 6-digit LCD
Display range: 0 to 999,999 mJ/cm2
Power source: long life 3.6 V Lithium Battery
Power consumption: 100 μA
Battery service life: 10,000 hrs
Dimensions: Æ 3.5” (90 mm), height ½” (12 mm)
Weight: approx. 5.25 ounce (150 grs.)
Temperature range: 0 to 45° Centigrade
Heat protection: Heat shield on back plate
Base Accuracy: ± 5 %
While on the conveyer belt, the UV-Integrator 150 can withstand max. 110° Centigrade for up to 10
seconds. The temperature of the housing should not exceed 45° Centigrade.nt>