LEXIA-3 PP2000 雪鐵龍標志工廠直銷_診斷儀_汽摩檢測設備_儀器、儀表_貨源

加工定制：否	類型：汽車故障診斷機	電壓：12（V）
工作溫度：0-35（℃）	型號：LEXIA-3 PP2000	適用車型：雪鐵龍標志

ng>產品簡介ng>

　　標志／雪鐵龍授權經銷商原廠使用的診斷工具，有瞭該工具你能做所有。
　　標志／雪鐵龍授權經銷商能做的功能。該診斷軟件與允許你對從1995年到現在所有的車型進行完全功能的診斷和設定。診斷接口為OBD-II（設在轉向柱旁），或者專用型接口（2001年以前車型）。

　　支持功能：
　　不同於其他的通用檢測工具隻能進行通常的故障碼查詢，該工具能同原廠專用工具相媲美。該診斷工具包含K線及CAN-BUS診斷功能，支持標準SAE　J1850總線（同時支持PWM和VPW）。

　　具體功能：
　　查詢信息
　　顯示完整的控制單元編號，如零件編號，軟硬件號，制造商等
　　閱讀故障碼
　　示所有故障存儲器中的故障碼，並支持報告打印和復制到剪貼板功能
　　清楚故障碼
　　該功能嫩能夠清除所有故障存儲器中已存的故障信息。
　　自動掃描　（全車掃描和測試）
　　查詢並讀取全車已安裝的所有控制單元的故障存儲器中的故障信息。
　　標準數據參考
　　程序能顯示當前狀態的數據流包括　發動機轉速　電池電壓　氧傳感器狀態　冷卻液溫度等。數據能以圖形方式顯示，同時可顯示9組數據，或顯示全部標準數據。並能支持以文件方式保存，以便事後分析
　　元器件測試
　　元器件測試能主動測試或激活部件（如打開燃料泵，鎖／開啟輪子，鎖／開啟門，斷開燃料等
　　編成和匹配設定
　　該功能對所有車型都很重要，因為有些系統如引擎控制單元，以表，氣囊，警報系統，車身控制單元和其他部件需要在更換或維修後復位或重新設定，甚至隻是在斷開連接後都須如此。
　　系統軟硬件要求：
　　至少PIII　400　MHz　CPU，128M　RAM　50MB硬盤空間　USB1.1接口（2.0最好）
　　Microsoft　windows98　sp2／2000／XP操作系統.

ng>Lexia 3ng>

ng>
ng>ng>
ng>

ng>Lexia 3 Product Descriptionng>

Lexia 3 Dealersng>diagnostic scannerng>for comprehensive diagnosis for Citroen and Peugeot cars. You can do all as an authorized Dealer does. This diagnostics software allows you to perform complete diagnostics of all from 1995 till present models. Diagnostics is performed viang>OBD II connectorng>(which is located near steering wheel) or via manufacturer-specific connector (only older cars, pre-2001).

ng>Lexia 3 Supported Functions
ng>

ng>
ng>Unlike other universal car scanner tools which only read fault codes, this software performs nearly ALL the functions like the original dealer diagnostic tool. Our diagnostic interface contains K-Line multiplexor, CAN-BUS interfaces and SAE J1850 bus (both PWM and VPW).

ng>The following diagnostic functions are supported by Lexia 3 diagnostic toolsng>

Read identification	Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc.
Read fault codes	Displays all stored and pending fault codes with complete description (e.g. Rail pressure - too low pressure). Program supports report printing or copy to clipboard.
Clear fault codes	This function clears all stored fault codes and other diagnostic information.
Auto-scan (complete car scan/test)	Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes.
Measured Values	Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Coolant Temperature, etc. Values can be displayed in graph, 9 values at once, or full listing (all measured values). Logging to file is also supported, which allows offline analysis.
Actuator test	Actuator test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc??) Programming functions/Adaptation This feature is of great importance in all vehicles because systems like Engine control units, Immobilizers, Airbags, Alarms, Body Control Units, and some others, require you to perform reset or programming procedures after car repair is done, or even configuration after replacing broken Control Unit.
Hardware and software requirements	Hardware requires at least Intel Celeron/Pentium III 400 MHz, 128 MB RAM, 50MB free HDD space Lexia Software supported language such as English, German, French, Japanese, Russian, Spanish, Portuguese, Swedish, Turkish, Dutch, Polish, Italian, Hungary, Greek, Czech. and USB 1.1 port (USB 2.0 recommended) and Microsoft Windows 98 SR2/2000/XP with the latest service pack installed. If customer requires, we can prepare ready to work PC. PPO Software supported language: English, Chinese, German, French, Japanese, Russian, Arabia, Spanish, Turkish, Danish, Iranian, Greek, Israel, Hungary, Indonesian, Italian, Dutch, Norwegian, Polish, Portuguese, Finnish, Slovenian, Swedish, Czech, Croatia, Thai.

新手教學

LEXIA-3 PP2000 雪鐵龍標志工廠直銷_診斷儀_汽摩檢測設備_儀器、儀表_貨源_批發一路發

批發市場僅提供代購諮詢服務，商品內容為廠商自行維護，若有發現不實、不合適或不正確內容，再請告知我們，查實即會請廠商修改或立即下架，謝謝。