梅特勒半微量天平，分析天平MS105DU ，電子精密分析天平MS105DU_其他機械量儀表_機械量儀表_儀器、儀表_貨源

加工定制：是

品牌：METTLER TOLEDO/梅特勒-托利多

型號：MS105DU

特點和利益

ng>精確稱量ng> 采用梅特勒-托利多高分辨率稱量技術(HRT)，內置兩組砝碼。配合全自動校準技術(FACT)，確保天平自動完成校正和線性化。
ng>高效處理ng> 減少每次稱量過程必須的操作步驟。左右手互換開關門(ErgoDoor)，實現一隻手打開防風罩的同時，另一手進行加樣。
ng>節約空間ng> 折疊式玻璃防風門，為您節約瞭使用空間，避免凸出天平以外。天平背部的通訊接口可從側面進行連接。
ng>易於清潔 ng>天平清潔從未如此方便：通過防風罩鎖定裝置QuickLock)拆卸防風罩，僅需幾個步驟，並且所有防風罩玻璃和承水盤均可放入洗碗機清洗。

Standard Features

All models offer

HCD (High Contrast Display)

全自動校準技術(FACT)

保護罩(終端)

保護罩

Below weighing hook for weighing below the balance

高分辨率稱量單元(HRT)

Overload Protection

Built in Date and Time function

SmartTrac shows the entire weighing range

Programmable 3 SmartKeys for shortcut access to applications

Protection of main balance configuration

Weighing in 16 different units
Taring over the entire weighing range
Be adapted to the environment
Applications like Piece counting, Percent weighing, Free factor, Statistics, Formulation, Totaling
Working in different languages: German, English, French, Spanish, Italian, Polish, Czech

規格 - MS105DU 半微量天平

ng>Limit valuesng>ng> ng>
Maximum capacity	120 g
Maximum capacity, fine range	42 g
Readability	0.1 mg
Readability, fine range	0.01 mg
Repeatability (at nominal load)¹⁾	0.08 mg (100 g)
Repeatability (at low load)¹⁾
Linearity deviation	0.15 mg
Sensitivity offset²⁾	0.4 mg (100 g)


ng>Typical values ng>
Repeatability (at nominal load)¹⁾	0.06 mg (100 g)
Repeatability (at low load)¹⁾	0.015 mg (20g)³⁾
Minimum weight (according to USP)	45 mg³⁾
Minimum weight (@U=1%, 2 sd)	3 mg³⁾
Settling time	4s / 8s
Sensitivity offset²⁾	0.3 mg (100 g)


ng>Dimensions ng>
Weighing pan dimensions (mm)	ø 80
Balance dimensions LxWxH (mm)	358x247x331

¹⁾Standard deviation (sd)
²⁾Stability of sensitivity with FACT self-adjustment switched on

新手教學

批發市場僅提供代購諮詢服務，商品內容為廠商自行維護，若有發現不實、不合適或不正確內容，再請告知我們，查實即會請廠商修改或立即下架，謝謝。