Reversible jaw pullers TMMR F series |
| |
 |
| |
Combined internal and external puller |
| |
| The multipurpose SKF TMMR F jaw pullers are able to grip on both the outside as well as the inside of a component, with equal strength. The TMMR Fs are available as a complete set, TMMR 8. |
| |
 | Both internal and external pulling | | Puller for use in every workshop | | Self-locking arms | | Special safety neck avoids damaging of thread and arms | | Hexagonal head on beam allows rotation of bearing during dismounting | | Gripping range from 23 to 350 mm (0.9 to 13.8 in) | | Also available as complete set on a stand |
|
| |
| Technical data (metric) | | Designation | Width of grip
(external pull) | Width of grip
internal pull | Effective
arm length | Maximum
withdrawal
force | Weight | | | mm | mm | mm | kN | kg | | TMMR 40F | 23 - 48 | 59 - 67 | 65 | 15 | 0,3 | | TMMR 60F | 23 - 68 | 62 - 87 | 80 | 15 | 0,4 | | TMMR 80F | 41 - 83 | 93 - 97 | 94 | 30 | 1,0 | | TMMR 120F | 41 - 124 | 93 - 138 | 120 | 30 | 1,2 | | TMMR 160F | 67 - 164 | 114 - 164 | 126 | 40 | 2,3 | | TMMR 200F | 66 - 203 | 114 - 205 | 151 | 40 | 2,6 | | TMMR 250F | 74 - 254 | 132 - 250 | 178 | 50 | 4,4 | | TMMR 350F | 74 - 350 | 135 - 352 | 233 | 50 | 5,1 | | TMMR 8 | Complete kit of 8 pullers on a counter stand |
|
| |
| Technical data (imperial) | | Designation | Width of grip
(external pull) | Width of grip
internal pull | Effective
arm length | Maximum
withdrawal
force | Weight | | | in | in | in | lbf | lb | | TMMR 40F | 0.9 - 1.9 | 2.3 - 2.6 | 2.6 | 3,400 | 0.8 | | TMMR 60F | 0.9 - 2.7 | 2.4 - 3.4 | 3.2 | 3,400 | 0.8 | | TMMR 80F | 1.6 - 3.3 | 3.7 - 3.8 | 3.7 | 6,750 | 2.2 | | TMMR 120F | 1.6 - 4.9 | 3.7 - 5.4 | 4.7 | 6,750 | 2.6 | | TMMR 160F | 2.6 - 6.5 | 4.5 - 6.5 | 5.0 | 9,000 | 5.2 | | TMMR 200F | 2.6 - 8.0 | 4.5 - 8.0 | 5.9 | 9,000 | 5.8 | | TMMR 250F | 2.9 - 10.0 | 5.2 - 9.8 | 7.0 | 11,250 | 9.7 | | TMMR 350F | 2.9 - 13.8 | 5.3 - 13.8 | 9.2 | 11,250 | 11.2 | | TMMR 8 | Complete kit of 8 pullers on a counter stand |
|
