ng>產品介紹ng>ng>               ng>

ng>Billng>ng>激光鏡片ng>

       Bill激光其產品國內具有很高的市場占有率。主要生產的CO2激光鏡片： 聚焦鏡、透鏡、擴束鏡合束鏡、窗口鏡、ATFR、相位轉換鏡、反射鏡、輸出鏡、底鏡。Bill Laser一直是眾多國內國際知名廠傢的長期供應商。     

 ng>關於Billng>ng>                           ng>

o         始於2002年，具有10年的CO2激光鏡片研發和制造經驗

o         強大的全球研發和技術隊伍，軍標級的產品質量保證

o         全球型的激光切割機鏡片選配

o         公司擁有完全自主生產研發能力

o         無論是在歐洲，還是在亞洲，實踐都證明： 

 Bill激光鏡片都能讓你:●聚焦光斑更穩●切割效果更好

ng>創新產品ng>ng>---ng>ng>超低吸收進口硒化鋅聚焦鏡ng>

□ng> ng>超低吸收，熱量更少

□  焦點更穩定，切割速度更快

□  性價比更高，使用壽命更長

ng> ng> 

ng>Focus Lensng>

Our corporation manufacturing laser focus lenses all adopt the U.S.A. imported CVD ZnSe. imported CVDZnSe has double-sided semipermeable films, which its main function is to decrease or eliminate the reflective light from lens, prisms, etc. and thus to increase these component transmittance level and decline or eliminate stray light. Our focus lenses have advantages over than those of others, such as low material absorption rate enduring high power density, firm surface membrane and resistant to wipe. In CO2 laser industry working band 10.6 um, our lenses are commonly used through rate of 99.8%.

As a most economical transmission focus components, lens are widely used in some industries, such as laser heat treatment, welding, cutting and infrared radiation collection, in order to obtain satisfactory performance and achieve the purpose that the surface of the lens should be towards the direction of imputed light beam towards the conjugate distance the longer end.

ng>聚焦鏡ng>ng>ng>

我公司生產的激光聚焦鏡全部采用美國進口CVD硒化鋅，材料吸收率低，生產的鏡片能承受高功率密度，並且表面膜層牢固，不易脫落，耐擦拭。進口硒化鋅雙麵鍍增透膜它的主要功能是減少或消除透鏡、棱鏡、平麵鏡等光學表麵的反射光，從而增加這些組件的透光量，減少或消除系統的雜散光。隨著用途廣泛擴大，形成瞭各種要求的增透膜，如：單波長增透膜、寬帶增透膜、超寬帶增透膜、雙波段增透膜、雙波長增透等。在CO2激光工業常用工作波段10.6μm的透過率能達到99.8%。

作為目前最經濟實惠的透射聚焦元件，透鏡適用於激光熱處理、焊接、切割和紅外輻射采集，為瞭取得滿意的性能，透鏡的曲麵應朝向準直的入射光束，或朝向共軛距離（物距和像距被合稱為共軛距離）較長的

ng>ng> 

ng>相關參數ng>

ng>ng> 

新手教學

批發市場僅提供代購諮詢服務，商品內容為廠商自行維護，若有發現不實、不合適或不正確內容，再請告知我們，查實即會請廠商修改或立即下架，謝謝。