氣動柱塞泵

美國技術氣動柱塞泵、氣動插桶泵、氣動泵

◆ 產 品 概 述 ◆

本產品是歐洲技術與東方智慧的完美結合，是引進美國氣動柱塞泵制造技術及工藝進行改良而研制成功的新一代國際最先進泵類產品，是索強公司技術人員和美國專傢共同研究的成果，可用於任何流體輸送、註入和抽空。

“氣動柱塞泵”（簡稱：氣動油桶泵，又名：氣動插桶泵，氣動泵、氣動活塞泵、氣動漿料泵，氣動濃漿泵，氣動往復泵，氣動打膠泵、氣動抽液泵，氣動防爆不銹鋼泵，皮革噴漿泵）

Pneumatic plunger pump

The United States of America Technology pneumatic plunger pump, pneumatic barrel pump, pneumatic pump

◆Product overview◆

This product is a European technology and Oriental wisdom of the perfect combination, is the introduction of the United States of America pneumatic plunger pump manufacturing technology and process are improved and the successful development of a new generation of the most advanced pump products, is the Suo Qiang company technical personnel and American experts to study the results, can be used for any fluid transfer, injection and evacuation.

Pneumatic pulp pump (short for pulp pump, also known as leather pulp spray pump, high-viscosity pulp pump, pneumatic pumping, pneumatic paint pump, pneumatic plug pump, pneumatic prevent explosion inserting the barrel pump, pneumatic intercourse pump)

定制各種型式進出接口、泵連接管尺寸及流量大小控制

Customize the various patter of passing in and out joints and the kinds of dimension of the pipe connecting pump

一、用途
氣動柱塞泵應用於人造革、移膜革、壓延革、彩塗板、印染、醫藥、塗層、化工、紡織、噴漆、噴塗、薄膜鍍鋁、彩鋼瓦等行業。適用於高粘度（VIS）≤12萬CPS/25℃的化工漿料輸送，具有防爆耐腐防沉淀、低噪音、節能等功能。是理想的移動輸送設備。
one, use

Pneumatic plunger pump used in leather, leather shift membrane leather, calendering, Cai Tuban, printing and dyeing, medicine, coating, chemical, textile, paint, coating, thin aluminized, color-coated steel tile industry. Suitable for high viscosity ( VIS ) is less than 120000 CPS / 25 C chemical slurry, with explosion-proof corrosion preventing sedimentation, low noise, energy saving and other functions. Is the ideal mobile conveying equipment.

二、使用方法
　　1、先將導料管正確放入所要輸送的料桶內。
　　2、將耐腐蝕軟管連接出料口接至送料地點。
　　3、進氣閥呈關閉狀態，然後將氣源管連接進氣閥接頭，根據所需漿料流量來開啟進氣閥　　調節氣動漿料泵運行頻率，即可工作。
Two, the use of methods

In 1, the first material guide pipe correctly in order to transport the material barrel.

In 2, the corrosion resistant hose outlet connected to a feeding place.

In 3, the inlet valve is closed, and then the air tube connected to the inlet valve joint, depending on the desired slurry flow to open the intake valve regulated pneumatic slurry pump running frequency, can work.

三、維護保養
　　1、氣動漿料泵在使用過程中防止撞擊缸體部位避免變形，發生活塞卡死現象，造成報廢。
　　2、活塞在運行壹佰萬餘次後，根據空壓機送氣過程中水份積留情況應清缸體，塗註30#潤滑油。
　　3、如經久不用，應在溶劑內工作狀清洗，防止漿料凍結，阻塞導料管。Three, maintenance

1, pneumatic slurry pump in use in the process of collision avoiding deformation of cylinder, piston clamping phenomenon occurs, causing scrap.

In 2, the piston in the operation Yibaiwanyu times, according to the air compressor in the process of accumulation of water supply should be clear and cylinder, with 30 # lubricating oil.

3, if is not, should be in a solvent cleaning work shape, prevent the slurry freeze, blocking material guide pipe.

四、註意事項
　　1、在工作中，如缸體部位發熱（以手感熱為準），應立即加30#潤滑油。
　　2、使用過程中如調節螺母松動，發生漏料，應及時調整螺母。

four, the matters needing attention

1, in the work, such as cylinder part of heat ( with hot date), should immediately plus 30 # lubricating oil.

2, the use of the process as the regulating nut loosening occurred, leakage, timely adjust nut.

五、結構和原理
　　本產品采用氣壓差的作用，使活塞上下運行，帶動導料活塞開閉，起到提料的作用。調整給氣動漿料泵工作氣體的流量與氣壓來控制和調節氣動漿料泵送料流量。結合感應開關能使之自動化工作。

Five, structure and principle

This product is the role of pressure difference, so that the piston moves up and down, expected to lead the pistons led off, played the role of reference materials. Adjustment to the slurry pump pneumatic gas flow and pressure to control and adjust the slurry pump pneumatic feeding flow. Combined with inductive switch can make the automation work.

新手教學

批發市場僅提供代購諮詢服務，商品內容為廠商自行維護，若有發現不實、不合適或不正確內容，再請告知我們，查實即會請廠商修改或立即下架，謝謝。