管道打底自動焊機

Automatic welding machine for root pass weld
型號：PPAWM-24A
Model: PPAWM-24A
技術參數：
Technical parameters:
適用管徑：DN50-600（φ60-630）
Pipe diameter applicable:DN50-600（φ60-630）
適用壁厚：3-30mm
Pipe wall thickness applicable:3-30mm
適用管長：400-8000 mm（對於≤400 mm的管子，采取一定輔助手段後亦可進行焊接）
Pipe length applicable:400-8000mm（for pipe dia ≤400 mm , adopt to auxiliary method to welding）
適用材質：碳鋼、合金鋼、不銹鋼、低溫鋼等
Materials applicable :carbon steel 、alloy steel 、stainless steel and cryogenic steel 
適用焊縫：各種管段焊縫，如管子-管子焊縫、管子-彎頭焊縫、管子-法蘭焊縫、法蘭-法蘭焊縫、法蘭-彎頭焊縫等（必要時采用假管過渡聯接）
Welding line applicable: various welding lines of spool pieces such as pipe-pipe, pipe-elbow, pipe-flange, flange-flange and flange-elbow, etc（a fake pipe transition connection shall be applied if necessary）
壓緊系統：壓緊臂絲桿高度調節壓緊
Clamping system: clamping arm move up and down by screw
控制系統：本公司專有技術產品，PLC控制、文本顯示器顯示
Control system: a product of our patented technology ,PLC control , and show by text display
調節系統：
驅動方式：電動十字調節擺動器、步進電機驅動
Driving system: driven by two-row rubber roller and reducer
調節方式：焊槍上下、左右位置無級可調
Adjustment way: welding gun up and down , right and left adjustment by stepless
調節方法：焊槍上下、左右位置采用按鈕方式，在操作過程進行實時、精確對中調節
Adjustment method: welding gun up and down, right and left position by button way, during operating procedure to real time, accuracy to center adjustment.
擺動系統：
Oscillating system:
擺動方式：電動十字調節擺動器、步進電機驅動
Oscillating mode: adjustment by electric cross oscillator , drive by step motor
調節方式：電動十字調節擺動器對焊接擺幅、擺動頻率和左右定時等進行無級可調
Adjustment mode: welding swing, swing around the frequency and left and right pause time etc by electric cross oscillator to adjustment of stepless
調節方法：擺動參數（焊接擺幅、擺動頻率和左右定時）采用旋鈕+數顯調節方式，可在操作過程進行實時調節
Adjustment way: swing parameter(welding swing, swing frequency and left and right pause time) use to button+ digital display adjust way, can adjustment in time during operating process
焊接系統：
Welding system:
驅動方式：二排襯膠滾輪、伺服電機+減速器驅動
Driving mode: two row with rubber rollers, servo motor + reducer drive
調節方式：工件轉速變頻、無級可調（平穩），乾伸長度電動、無級可調
Adjustment mode: Workpiece rotation variable frequency, stepless adjustable (stable), cross arm stretch the length of electrical, stepless adjustable
調節方法：工件轉速/焊接速度采用旋鈕+數顯調節方式、乾伸長度采用按鈕方式，均可在操作過程進行實時調節
Adjustment mode: Workpiece Rev speed / welding speed adjustment using knob + digital way, cross arm of extending length of use of buttons, can be adjusted in real-time operation process
焊接方式：氣保打底
Welding mode: CO2 gas shielded arc welding and MIG welding process for root pass welding.
焊接電源：米勒 Pipepro450 RFC
Welding power : Miller Pipepro 450 RFC

新手教學

批發市場僅提供代購諮詢服務，商品內容為廠商自行維護，若有發現不實、不合適或不正確內容，再請告知我們，查實即會請廠商修改或立即下架，謝謝。