型號Model | CK6140 | CK6240 |
床身上最大工件直徑Max. Swing over bed | 400mm | 400mm |
刀架上最大工件直徑Max. Swing over carriage | 210mm | 210mm |
馬鞍槽最大工件直徑Max. Swing in gap | 630mm |
馬鞍槽有效長度Effective gap length | 210mm |
最大工件長度Max. Length of work piece | 500mm or 750mm or 1000mm or 2000mm |
床身寬度Width of bed | 400mm |
刀桿截麵Section of turning tool | 25X25mm |
主軸Spindle | 主軸轉速范圍Spindle speeds | 11—1600 r/min (24 steps) |
主軸內孔Hole though spindle | 52mm(80mm) |
主軸孔錐度Spindle taper | Morse No.6 (莫氏6號) |
重復定位精度Repeatability error | 0.01mm |
快移速度X/Z rapid traverse | 3 /6 m /min |
床尾Tailstock | 床尾主軸最大行程Max tailstock spindle travel | 150mm |
床尾主軸直徑Tailstock spindle diameter | 75mm |
床尾主軸孔錐度 | Morse No.5 (莫氏5號) |
主電機Main motor | 7.5KW(10HP) |
外形尺寸 | Overall dimensions for 500mm | 2550*1120*1700 mm |
Overall dimensions for 750mm | 2800*1120*1700 mm |
Overall dimensions for 1000mm | 3300*1120*1700 mm |
Overall dimensions for 2000mm | 3800*1120*1700 mm |
