1.簡介
B.ZSN-II塑料註射成型機是我公司在第二代塑料註射成型機的基礎上吸收國內外先進技術，設計、研制成功的。B.ZSN-II塑料註射成型機及模具采用雙模式交替成型，工作效率更高；B.ZSN-II塑料註射成型機在工人操作合模時，需要兩隻手同時各按下兩隻合模按鈕，避免手伸進快速合模的模具中間，起到更安全保護作用。
采用螺桿預塑、定量、限位加料，全液壓快慢速合模。總壓閥采用雙比例式，應力分配均勻，低壓保護精確，全行程流暢優異。多段溫度控制、多段射出壓力、射速、背壓無極調整；有座進座退功能，方便調模和清洗料管；鎖模力大，模具移動平穩，電氣聯鎖，註頭光滑美觀,安全可靠；具有占地麵積小；主要部件全封閉式；模具拆裝方便等優點。
註肩模具：管子的直徑Φ12.7mm—Φ60 mm；形狀有橢圓形、圓形，也可根據客戶要求另行設計制造；螺紋形狀也可根據客戶要求設計制造。
2.主要部件配置表
序號 | 名 稱 | 品牌 |
1 | 電磁閥 | 美國桑尼士Sunny |
2 | 比例閥 | 美國桑尼士Sunny |
3 | 油馬達 | 中意 |
4 | 電控 （中文電控熒屏顯示） | 三星控制器 |
5 | 軸 承 | NSK(日本) |
6 | 電 機 | 長風電機 |
7 | 油 封 | 奧地利EConOMOS NOK |
8 | 料管組件 | 浙江華業/天星 |
9 | 低壓電器 | 日本富士、法國施耐德 |
10 | 電子尺 （射出、鎖模控制） | GEFRAN(意大利) |
4.其他
1：購機時不贈送備品，隻提供常用工具及模具壓板；
2：電機及控制電源：380V-50HZ ；加熱器（料筒）：220V-50HZ；自備三相四線制電源線８-10平方毫米若乾米;
3：需自備46#抗磨液壓油;
4：需自備冷卻水；自備軟膠水管;
5：模具如需加熱或冷卻須另購模溫機或冰水機；
6：原料如需乾燥需另購乾燥設備
7：標準機上料為人工上料，如需自動需購自動上料系統；
8：安裝隻需水平地麵即可；機臺自帶彈性墊；
設備技術標準規格；
1：全電腦中英文顯示，控制器具有模具記憶功能
2：控制器含監視頁：警報，料筒溫度，動作，射出位置，合模位置，動作時間等；
3：加熱器用電：220V；
4：模具保護機構（合模低壓保護）；
5：含自動清料功能；
6：料筒的溫度控制：4段；
7：滑動部的加油：手動；
其它說明：
1：設備保修1年（易損件除外）；
2：修理響應：最遲12小時以內響應，保修期外原則上收取零件費用；
3：全程提供註塑成型技術服務；
4：設備購入前可以提供模具試驗；
備 註：
1.Brief Introduction
B.ZSN-II Plastic injection & forming machine is developed based on our second generation injection machine and advanced foreign technologies. Its double-mould alternative forming way gives it high work efficiency when the worker operate the machine, it need two hands press the joint mold at the same time. Avoiding the hands touch the middle of the mold. Secuing the safty of the people.
This machine ,safe and reliable has the advantages of premolding on screw, material-input in a fixed quantity at a specific postion.the chief valve adopt doublt proportion, stress match with equalyt,precision in low pression.The whole process is fluency and excellent.control temperature and jet pression in different sectors. Firing rate and stepless adjustment. With the function of in or out which it will more convinient of adjust the mold and cleanning the pipe.large mould-lock power ,smooth mould moviing ,electric and pneumatic interlocking .small taken installation space,convenient assembing and disassembling of the moulds..
Shouldder-injection mould : the diameter of tube is 12.7mm-60mm.with ellipse and round shape ,we can manufacture it according ot the customer’s needs and also can make screw shape.
2.Main Technical Parameters:
Model | Units | B.ZSN-II | ||
Injection system | Screw Diameter | MM | ￠32 | ￠36 |
Injection Pressure | Kg/C? | 1662 | 1313 | |
Theoretical Shot Volume | CM³ | 96 | 122 | |
Max.Shot Weight | g/oz | 86/3.0 | 109/3.8 | |
Injection Rate | CM³/sec | 58 | 73 | |
Temperature Control | Zone | 4 | ||
Material Hopper Capacity | L | 20 | ||
Clamping system | Clamping Force | T | 40 | |
Opening Force | T | 8.3 | ||
Distance between Tie Bars | Mm | 415*255 | ||
The Biggest Contain Mold Space | Mm | 400*250 | ||
Min Mold Height | Mm | 150 | ||
Opening Stroke | Mm | 200 | ||
Max Open Daylight | Mm | 350 | ||
Ejector Force | T | 1.3 | ||
Ejector Stroke | Mm | 40 | ||
HydraulicElectric system | Max Hydraulic Pressure | Kg/ C? | 140 | |
Pump Output | L | 160 | ||
Pump Motor Power | Kw | 5.5 | ||
Barrel Heating Power | Kw | 4.1 | ||
Total Wattage | Kw | 9.6 | ||
Slipform system | Slide Plater Size | Mm | 840*390 | |
Slide Plater Stroke | Mm | 420 | ||
Round Set Diameter | Mm | - | ||
Others | Machine Weight | T | 1.3(1.9) | |
Size (L*W*H) | m | 1.8*1.2*2.6 (2.1*1.1*2.6) | ||
3.Main Parts
NO | name | brand |
1 | Amarican Sunny | |
2 | Amarican Sunny | |
3 | oil motor | Zhongyi |
4 |
| samsung controller |
5 | principal axis | NSK from Japan |
6 | motor | Changfeng Motor |
7 | oil sealing | EConOMOS NOK from Austria |
8 | low-voltage apparatus | Fujifilm from Japan, Schneider from France |
9 | NOVO
| GEFRAN from Italy |
4. Features
1)Four-column vertical compression mold-locked, vertical injection, Chinese/English controller,screen display, dualratio pressure, oil flow control, optimized mechanical structure, fluent operation and fast speed.
2) Sliding, floor use nodular cast iron.
Then connect point use steel isolation and have lubricate hole.
So great reduce the abrasion of slide plate and small transmutation, to prolong the using time and increase precision.
3)Ejector can match different slide plate to use and can free adjust stroke , stripping force , ejector operate speed and stripping times can preset according to demands.
4)Single slide plate use the before and after(or left and right) reciprocating slide plate, insert device and fetch device operate outside, high safety.
5)Double slide plate use double mold to slide left and right alternatively, one mold molding, one mold operating outside , high operation and increase 30-50% work efficiency.
6)Diversity oil system design
(semi-closed, closed, servo or high speed injection) to meet customers demands. Expandable programming, connect with automatic embedded and fetch device, reach to fully automatic.
批發市場僅提供代購諮詢服務，商品內容為廠商自行維護，若有發現不實、不合適或不正確內容，再請告知我們，查實即會請廠商修改或立即下架，謝謝。
