• DKBS - Bi-lateral slits
• DKGPIB - IEEE-488 communication interface (internal)
• DK2400 and Hand-held controllers for local control
• IR240 - Gold optics
• DK2PORT - Bifurcated fiber bundle for attaching 2 devices to 1 port.
• AB300 - Automated 6 position filter wheel

See options and accessories

Click to enlarge

• Connects to any computer via RS232 or IEEE-488.
• Motorized slits.
• Triple-grating turret allows high efficiency scanning across a broad spectral range.
• May be factory configured as a monochromator or spectrograph.
• Scans in both directions and with Constant Spectral Resolution (CSR).
• Integrates with SP filter wheel for automatic filter switching.
• Suitable for fluorescence and absorption studies, detector characterization, thin film measurements, etc.

  Wavelength Selection is No Longer Expensive

  The Digikrom DK480 is a complete computer integrated solution. Easy to use commands control the triple grating turret, motorized slits, and optional motorized filter wheel for quick and easy sorting. Instrument mode can be set for constant spectral resolution (CSR), where the slit width is automatically modified to compensate in the change in dispersion with wavelength to maintain constant spectral bandpass.

  Rugged cast construction, A-Thermal design, and SP direct grating drive make this unit the most repaetable and reliable in its class. Each instrument is calibrated and certified prior to delivery.

  Feature Value

  Design:	Czerny-Turner. Triple-grating turret standard.
  Focal Length:	480mm
  f/#:	7.8
  Wavelength Drive:	Worm and wheel with computer control. Bi-directional.
  Wavelength Precision and Reproducibility:	0.007nm (with 1200g/mm grating)
  Wavelength Accuracy:	± 0.3 nm standard (with 1200 g/mm grating)
  Scan Speed:	1 to 1200nm/minute (with 1200g.mm grating)
  Stray Light:	< 0.01% at 220nm (Nal)
  Slits:	Unilateral, computer controlled, curved entrance and straight exit standard. Width - 10μm to 3000μm Height - 2mm to 20mm
  Reciprocal Dispersion:	1.60nm/mm (with 1200 g/mm grating)
  Max Resolution:	0.03nm (with 1200 g/mm grating)
  Gratings:	One to three gratings (68 x 68mm standard, 68 x 84mm optional) must be purchased. See Appendix A for options.
  Software:	Demonstration control program and LabView driver included.
  Power:	100 - 240V, 50/60Hz, 60W 220/230/240V, 50/60Hz @ 0.5A optional.
  Interface:	RS232 standard
  Weight:	45 lbs.
  Warranty:	One year
  Options:	DKBS - Bi-lateral slits DKGPIB - IEEE-488 communication interface (internal) DK2400 and Hand-held controllers for local control IR480 - Gold optics DK2PORT - Bifurcated fiber bundle for attaching 2 devices to 1 port. AB300 - Automated 6 position filter wheel See options and accessories

• Internal controller connects to any computer via RS232 or IEEE-488. Hands-off control of three slit assemblies and two grating turrets.
• Scans in both directions and with Constant Spectral Resolution (CSR).
• Triple-grating turrets allows high efficiency scanning across a broad spectral range.
• Additive dispersion increases resolution and reduces stray light for Raman and fluorescence studies, subtractive dispersion minimizes broadening of pulse sources.
• Integrates with SP filter wheel for automatic filter switching.
• May be factory configured as a monochromator or spectrograph.

  The Pioneer: Better Resolution, Stray Light Control

  The DK242 is two cascaded monochromators, with the exit slit of the first monochromator functioning as the entrance slit of the second. This instrument may be factory configured to operate as either an additive or subtractive dispersion double monochromator. In both modes, the two monochromators act as a double filter with the rejection of stray light being nearly the square of the single monochromator value. In the additive dispersion mode, the DK242 is the equivalent of a half-meter monochromator, but permits greater reduction of stray light. The first grating spreads the spectrum over an angular range; the second grating then doubles this dispersion. The result is twice the resolution of a single 1/4-meter monochromator. In subtractive dispersion mode the first monochromator selects a bandpass. The second monochromator then removes the temporal and angular aberrations introduced by the angular spectral dispersion in the first monochromator.

  The DK242 offers a unique solution to practical problems in the spectroscopy of pulsed sources. For example, an ordinary monochromator will introduce up to 250 pico second broadening in light pulses that are passed through the monochromator. Operated in the subtractive dispersion mode, the DK242 reduces this broadening to almost zero because the second monochromator equalizes the optical path length of the first.

  The DK242 is also a unique solution to the practical problems of Raman spectroscopy because the high stray light rejection of the two monochromators allows observation close to the laser line. SP's unique CSR scanning technology also improves efficiency in the red and near IR while maintaining resolution. (In the CSR mode, the monochromator's change in dispersion with wavelength is compensated by a change in slit widths while bandpass remains constant. Intensity improvement up to 4x can occur).

  Equipped with SP's Direct Digital Drive, the DK242 is a complete computer-controlled instrument. The control electronics are internal, calibration is automatic. Any computer can control the DK242 through its RS232 interface with simple commands (shown in all capital letters) to direct the monochromator to GO TO a wavelength, to SCAN between wavelengths at a preset SPEED, to select gratings, or to report its STATUS.

  Feature Value

  Design:	Double cascaded Czerny-Turner. Triple-grating turrets standard in each section.
  Focal Length:	240mm each section.
  f/#:	3.9 overall
  Wavelength Drive:	Dual worm and wheel with electronic synchronization and computer control. Programmable in additive or subtractive dispersion
  Scan Speed:	> 1 to 1200nm/minute (with 1200 g/nm grating)
  Stray Light:	< 10-9
  Slits:	Unilateral, computer controlled, Width - 10μm to 3000μm Height - 2mm to 20mm
  Gratings:	Two to six gratings (68 x 68mm standard, 68 x 84mm optional) must be purchased. See Appendix A for options.
  Wavelength Precision:	0.01nm (additive)    0.01nm (subtractive)
  Wavelength Accuracy:	± 0.3nm (additive)    ± 0.3nm (subtractive)
  Reciprocal Dispersion:	1.60nm/mm (additive)    --- (with 1200 g/mm grating)
  Max Resolution:	<0.04nm (additive)    0.06nm (subtractive)
  Pulse Broadening:	200 ps max (additive)    10 fs max (subtractive)
  Interface:	RS232 standard
  Software:	Demonstration control program and LabView driver included.
  Power:	110 / 120V, 50/60Hz @ 1A standard. 220/230/240V, 50/60Hz @ 0.5A optional.
  Warranty:	One year
  Options:	DKBS - Bi-lateral slits DKGPIB - IEEE-488 communication interface (internal) DK2400 and Hand-held controllers for local control IR240 - Gold optics DK2PORT - Bifurcated fiber bundle for attaching 2 devices to 1 port. AB300 - Automated 6 position filter wheel See options and accessories

DK Series Options and Accessories

DKBSBi-lateral slit option for DK240/242/480. Both sides of slits are automatically controlled for maintaining image centering when wider slits are necessary (tolerance ± 10μm). DKGPIBInternal IEEE-488/GPIB communication interface option for DK240/242/480. Separate output connector from Monochromator. IR240For use with DK240. Infrared (gold) coatings on optics for DK240. Enhances transmission by up to 40% between 600 -1100nm. Not suitable for work below 600nm. IR240SPSame as above, for use with DKSP240 IR242For use with DK242. Infrared (gold) coatings on optics for DK242. Enhances transmission by up to 80% between 600 - 1100nm. IR242SPSame as above, for use with DKSP242 IR480For use with DK480. Infrared (gold) coatings on optics for DK480. Enhances transmission by up to 40% between 600 -1100nm. IR480SPSame as above, for use with DKSP480 DK2401Hand-held monochromator controller for DK240/242/480. Allows local control of monochromator when computer is not available or in series with a computer. DK24PSRS232 Cable assembly for PS/2 style computer DK24MARS232 Cable assembly for MAC style computer DK24ICIEEE-488/GPIB universal cable assembly AB300Six position, 1" diameter automatic filter wheel assembly that bolts directly to DK entrance. Recieves power and commands directly through DK unit. See page 92 for more information. DKSP-TO-DKAttachment to allow DKSP Spectrograph to operate as a monochrometor. It includes CM standard 6-fixed slit set (page 17). AB200Single filter carrier that mounts directly between DK unit and accessories DK Series Standard Gratings, 68 x 68 mm     Part # Ruling(g/mm) Peak(nm) Range(nm) Peak(%T) AG2400-00240-686 2400 240 180 - 680 70 AG1200-00200-686 1200 200 180 - 450 65 AG1200-00250-686 1200 250 180 - 460 70 AG1200-00300-686 1200 300 200 - 750 72 AG1200-00500-686 1200 500 330 - 1000 83 AG1200-00600-686 1200 600 400 - 1500 80 AG1200-00750-686 1200 750 480 - 1500 85 AG1200-01000-686 1200 1000 550 - 1500 75 AG0600-00500-686 600 500 350 - 1300 80 AG0600-01200-686 600 1200 800 - 3000 85 AG0600-01600-686 600 1600 950 - 3000 93 AG0300-00500-686 300 500 310 - 1100 80 AG0300-02000-686 300 2000 1200 - 4000 88 AG0300-02500-686 300 2500 1500 - 6000 88 AG0300-03000-686 300 3000 1800 - 6000 80 AG0150-00500-686 150 500 320 - 980 72 AG0150-04000-686 150 4000 2500 - 9000 93 AG0075-08000-686 75 8000 5000 - 15000 82 AG0050-00600-686 50 600 400 - 1200 78 AG0050-12000-686 50 12000 7500 - 20000 82