深圳立維創展科技——專業的中高端連接器、互連組件代理商！專業代理ITT圓形連接器、矩形連接器、光纖連接、射頻連接器、功率高電壓連接器、閃存卡、電纜組件等。保證原裝進口。

Multi Rack and Panel

TheMultiwayRange has six plan forms available and offers an extremely reliable, robust and versatile connector system, in which any of the Trident signal or coaxial contacts can be used. All Multi Rack &Panel connectors are RoHSCompliant.

NeptuneCircular

Neptuneis a range of circular connectors specifically designed for harsh environment applications. They come with membrane wire seals that meet the requirements for IP67 and do not require blanking plugs for unused cavities. They will accept various combinations of signal (13 A) and power (30 A) contacts. The receptacle connectors feature stainless steel bayonet pins  integrally molded into the bodies. The plug connectors are available with either high strength metal or corrosion resistant plastic coupling rings. All Neptune Circular Connectors are RoHS Compliant.

Ringlock Circular

Ringlock is a range of robust circular connectors for industrial applications. It uses a metal bayonet coupling system for quick and reliable connections and thermoplastic bodies for low installed cost. The connectors are available in several sizes ranging from 4 to 48 circuits for signals of up to 13 A or coax. With the addition of a cable clamp, the connectors can be water sealed to meet IP65.All Ringlock Circular Connectors are RoHSCompliant.

Other Contacts

Tooling can be found in the specific Product line Catalogues (DSub, APK), coaxial tooling is listed under the machined Trident Contacts.

Snap Together Rectangular

These are low installed cost connectors rated for up to 13 A and 250 V ac. They are typically used for circuit board and internal wiring applications. Snap Together connectors facilitate easy assembly and removal of equipment such as motors, fans, transformers, etc.

Snap Together Slimline

TheSlimlineRange offers a low profile connector system that is well suited  for circuit board applications. The precision machined contacts are ideal for power and sensitive signals. All Snap Together - Slimline connectors are RoHS Compliant.

TNM Circular

TNM (Trident Neptune Metal) is specifically designed to meet the needs of systems that require shielding, sealing, and the extra durability of a metal shell. The combination of Trident contacts, membrane seals, and the Universal Shielded Endbell* make TNM both cost effective and easy to assemble.  TNM features nickel plated zinc alloy shells and UL 94 V-0 rated thermoplastic insulators. All TNM receptacles are supplied with an interfacial seal to provide sealing between connectors to IP67. In addition, a membrane seal is available for those applications requiring the sealing of discrete wires a the rear of the connector.  In order to seal multicore jacketed cables to connectors an endbell is available. This has ‘O’ ring sealing to the connector and second seal to the cable jacket. All TNM Circular Connectors are RoHS Compliant

T2P Contacts

General recommendations for the selection of Trident contacts are listed below.
Plating: Tin is recommended for most applications (with 50 or fewer mating cycles). It is cost effective and matches well to most wires. Gold is preferred for special situations. Gold resists oxidation, has surface conductivity, and has a low coefficient of friction. These features make gold the preferred plating for low level signals (a rule of thumb is less than 100 mA, corrosive environments for unsealed connectors,) and for increased mating cycles. The electrical performance of the contact is determined at the surface of the contact. For this reason, flash gold platings are recommended. Thicker gold platings are recommended for more than 50 cycles. All Trident Contacts are RoHS Compliant.

T3P Contacts Retardant

General recommendations for the selection of Trident contacts are listed below.
Plating: Tin is recommended for most applications (with 50 or fewer mating cycles). It is cost effective and matches well to most wires. Gold is preferred for special situations. Gold resists oxidation, has surface conductivity, and has a low coefficient of friction. These features make gold the preferred plating for low level signals (a rule of thumb is less than 100 mA, corrosive environments for unsealed connectors,) and for increased mating cycles. The electrical performance of the contact is determined at the surface of the contact. For this reason, flash gold platings are recommended. Thicker gold platings are recommended for more than 50 cycles. All Trident Contacts are RoHS Compliant.

Trident Flame High Voltage

This new connector series is compliant to railway standards. The material properties are I2/F2 according to NFF16-101. These are low installed cost connectors rated for up to 13 A and 250 V ac. They are typically used for circuit board and internal wiring applications. All flame retardant connectors are RoHS Compliant.

TM50PN 2851-