MINOLTA CS-100A色度計_其他光學儀器_光學儀器_儀器、儀表_貨源

TypeAcceptance angleOptical systemAngle of viewFocusing distanceReceptorsResponse timeMeasuring rangeAccuracyRepeatabilityTarget valueMeasurement modesDisplayData communicationExternal controlPower sourceOperating temperature/humidity rangeStorage temperature/humidity rangeDimensions (W × H × D)WeightStandard accessories

SLR spot colorimeter for measuring light-source and surface luminance and chromaticity
1°
85mm f/2.8 lens; SLR viewing system; flare factor less than 1.5%
9° with 1° measurement area indication
1014mm (40 in.) to infinity
3 silicon photocells filtered to detect primary stimulus values for red, green, and blue light Spectral response Closely matches CIE 1931 Standard Observer curves
FAST: Sampling time: 0.1s, Time to display: 0.8 to 1.0s; SLOW: Sampling time: 0.4s, Time to display: 1.4 to 1.6s Luminance units: cd/m²or fL (switchable)
FAST: 0.01 to 299,000cd/m²(0.01 to 87,530fL); SLOW: 0.01 to 49,900cd/m²(0.01 to 14,500fL)
Luminance (Y): ±2% of reading ±1 digit Chromaticity (x,y): ±0.004 (Illuminant A measured at ambient temperature of 18 to 28°C/64 to 82°F)
Luminance (Y): ±0.2% of reading ±1 digit Chromaticity (x,y): FAST: Y 100cd/m²or above: ±0.001; 48.1 to 99.9cd/m²: ±0.002; Below 48.1cd/m²: Below measurement range SLOW: Y 25.0cd/m²or above: ±0.001; 12.0 to 24.9cd/m²: ±0.002; Below 12.0cd/m²: Below measurement range (Measurement subject: Illuminant A)
1; set by measurement or numerical input
Absolute color: Yxy; Color difference: Δ(Yxy)
External: LCD; 3 values (Y, x, and y) of 3 digits each with additional indications Viewfinder: 3-digit LCD (showing luminance value y ) with LED backlight
RS-232C; baud rate: 4800bps
Measurement process can be started by external device connected to data output terminal
One 9V battery; Power can also be supplied via data output terminal
0 to 40°C, relative humidity 85% or less (at 35°C) with no condensation
-20 to 55°C, relative humidity 85% or less (at 35°C) with no condensation
79 × 208 × 154mm (3-1/8 × 8-3/16 × 6-1/16 in.)
890g (2 lb.) without battery
Lens cap; Eyepiece cap; Protective filter; ND eyepiece filter; 9V battery; Chromaticity chart; Case

SLR spot colorimeter for measuring light-source and surface luminance and chromaticity

1°

85mm f/2.8 lens; SLR viewing system; flare factor less than 1.5%

9° with 1° measurement area indication

1014mm (40 in.) to infinity

3 silicon photocells filtered to detect primary stimulus values for red, green, and blue light
Spectral response Closely matches CIE 1931 Standard Observer curves

FAST: Sampling time: 0.1s, Time to display: 0.8 to 1.0s; SLOW: Sampling time: 0.4s, Time to display: 1.4 to 1.6s
Luminance units: cd/m²or fL (switchable)

FAST: 0.01 to 299,000cd/m²(0.01 to 87,530fL); SLOW: 0.01 to 49,900cd/m²(0.01 to 14,500fL)

Luminance (Y): ±2% of reading ±1 digit
Chromaticity (x,y): ±0.004 (Illuminant A measured at ambient temperature of 18 to 28°C/64 to 82°F)

Luminance (Y): ±0.2% of reading ±1 digit
Chromaticity (x,y): FAST: Y 100cd/m²or above: ±0.001; 48.1 to 99.9cd/m²: ±0.002; Below 48.1cd/m²: Below measurement range
SLOW: Y 25.0cd/m²or above: ±0.001; 12.0 to 24.9cd/m²: ±0.002; Below 12.0cd/m²: Below measurement range (Measurement subject: Illuminant A)

1; set by measurement or numerical input

Absolute color: Yxy; Color difference: Δ(Yxy)

External: LCD; 3 values (Y, x, and y) of 3 digits each with additional indications
Viewfinder: 3-digit LCD (showing luminance value y ) with LED backlight

RS-232C; baud rate: 4800bps

Measurement process can be started by external device connected to data output terminal

One 9V battery; Power can also be supplied via data output terminal

0 to 40°C, relative humidity 85% or less (at 35°C) with no condensation

-20 to 55°C, relative humidity 85% or less (at 35°C) with no condensation

79 × 208 × 154mm (3-1/8 × 8-3/16 × 6-1/16 in.)

890g (2 lb.) without battery

Lens cap; Eyepiece cap; Protective filter; ND eyepiece filter; 9V battery; Chromaticity chart; Case

新手教學