深圳立維創展科技——專業的中高端連接器、互連組件代理商！專業代理ITT圓形連接器、矩形連接器、光纖連接、射頻連接器、功率高電壓連接器、閃存卡、電纜組件等。保證原裝進口。

Chip onFlex

ITT’s new light weight Cannon Chip-on-Flex filter connector technology provides a significant performance improvement in thermal shock and vibration. In the new Cannon Chip-on-Flex design, the internal thermal shock stresses have been virtually eliminated. The ceramic planar array capacitor block has been replaced by a flex circuit where individual chip capacitors are surface mounted on a pad adjacent to the feed thru contact. The result is a very robust filter connector with superior mechanical performance and improved reliability.

TBKAD

TBKAD/E connectors represent a major milestone in presenting a new rack and panel connector for support of the aerospace market.

High mating forces of pluggable modules in a rack have been reduced by approximately two-thirds. Filter adaptations include either single module of tandem (dual) module with crimp piggyback rear release contacts.

In the ARINC 600 connector series, size 22 contacts are the only size that utilize the Pos-Align connector construction feature. The hooded socket extends from its receptacle insulator in the filter design.

TDI

ITT developed a line of filter connectors to meet the industry’s demand for improved control of Radio Frequency and Electro-magnetic Interference (RFI/EMI). These TD1* filter connectors, have been designed to combine the functions of a standard electrical connector and feed-thru filters into one compact package. In addition to offering greater design flexibility and system reliability, they are designed for applications where space and weight are prime considerations. These connectors are intermateable with all standard D-subminiature connectors. They are also intermateable with MIL-C-24308 types and meet applicable portions of that specification. All TD1* filter contact assemblies are tested 100% during in-process and final inspection, for capacitance, insulation resistance and dielectric withstanding voltage. Attenuation is checked as required for each type of filter to assure performance to guaranteed levels.

TDPX

TDPX filter connectors are used primarily on commercial and military aircraft for radio and instrumentation equipment and are available in single thru four gang version with standard ARINC shells and polarizing posts. They are intermateable with the standard DPX connectors are available in 9 contact arrangements.

TKJ/TKJL/TKJA/TKJB

These miniature circular filter connectors are designed to combine the functions of a standard electrical connector and a feed-thru filter into one compact package. They are designed and can be provided with planar array capacitor or Chip-on-flex technology to meet the applicable portions of military specification MIL-DTL-38999 series I, II, III and IV. These connectors feature arrangements that will accommodate up to 12B contacts.

TMDM

With an increasing number of MDM connectors being used in avionics and military equipment and with increasing emphasis being put on EMI, RFI and EMP shielding, Cannon have developed a range of filter connectors to suit most applications.

The TMDM receptacle accommodates from 8 to 37 sizes, 24 AWG socket contacts on 1,27 (.050) centres and mates with the standard MDM plugs.

TPV

These miniature circular filter connectors are designed to combine the functions of a standard electrical connector and a feed-thru filter into one compact package.

TPV filter connectors are designed to meet the applicable portions of military specifications MILC-26482 and MIL-C-83723. They are also intermateable with the NAS1599 and the NASA 40M39569 type connectors. These connectors feature three-point bayonet lock coupling, five keyway polarization, and have contact arrangements that will accommodate up to 61 contacts in shell sizes, with both pin and socket contact versions available.

TPVOC24B61TPN