XKS3001側面操縱是綜合手術床廠傢直銷_手術專用設備_醫療設備_醫藥、保養_貨源

本產品供醫院手術室施行頭、頸、胸腹腔、會陰及四肢等外科及婦產科、眼科、耳鼻喉科、骨科等手術。采用油泵液壓升降，手術時所需體位調整均在臺面兩側操縱。

XKS3001型側面操縱式綜合手術臺的背板和腿板角度調節均由手搖操作蝸桿、齒輪和齒條機構傳動實現。臺面及護罩材質可根據用戶需求選擇優質冷軋碳鋼噴塑或高級不銹鋼。

This table is used for the surgery of head , neck , abdomen , perineum , limbs , gynecology , ophthalmology , otolaryngology and orthopedics , etc . The up and down moving is controlled by hydraulic system . The adjustment is manipulated at the two sides of the board .

The adjustment of the back section and the leg board of XKS3001 is controlled by worm gear , wheel gear and gear rack by hand . The material of the board and the shield can be chosen between cold-rolled carbonsteel and stainless steel with good quality according to the demands of our customers .

技術參數		XKS3001
臺面全長		2100mm
臺面寬度		480mm
臺面最低高度		750mm
臺面升降行程		250mm
前傾		30°
後傾		20°
左右傾		±18°
頭板調節		45°/-90°
背板調節		+75°/-18°
腰板調節		120mm
腿板調節		90°
足板		■
基本配套件	麻醉防護屏	■
	支肩架	■
	擱臂架	■
	支身架	■
	托腿架	■
	床墊	■

Technical Data		XKS3001
Overall length		21000mm
Width of table top		480mm
Floor minimum altitude		750mm
Traveling schedule		250mm
Trendelenburg		30°
Reverse Trendelenburg		20°
Lateral adjustment		±18°
Head rest		45°/-90°
Back section		+75/-18°
Waist bridge		120mm
Leg plate(s)		90°
Foot board		■
Accessories	Anesthetics Screen	■
	Shoulder Rest	■
	Arm Support	■
	Body Support	■
	Knee Crutch	■
	Cushion	■

新手教學

XKS3001側面操縱是綜合手術床廠傢直銷_手術專用設備_醫療設備_醫藥、保養_貨源_批發一路發

批發市場僅提供代購諮詢服務，商品內容為廠商自行維護，若有發現不實、不合適或不正確內容，再請告知我們，查實即會請廠商修改或立即下架，謝謝。