西門子[SIEMENS]風管式溫度傳感器QAM2120.040

風管式溫度傳感器QAM2110.040、QAM2120.040

傳感器采集風管內的空氣溫度

用途：

風管式溫度傳感器用於通風及空調設備中的以下用途：
•送風或排風溫度傳感器
•限定傳感器，例如最低送風溫度的設定
•參考傳感器，例如房間設定溫度隨室外溫度變化而按一定函數關系轉換
•露點溫度傳感器
•測量傳感器，例如用於測量值的顯示或者配套樓宇自控系統使用

型號一覽：

Equipment combinations:

All systems or devices capable of acquiring and handling the sensor’s passive Pt 100,

LG-Ni 1000 or T1 output signal.

Function:

The sensor acquires the air temperature via its sensing element whose resistance

changes as a function of the temperature. The signal is delivered to a suitable controller

for further handling.

Mechanical design:

The duct temperature sensor consists of the following components:

• Two-sectional plastic housing comprised of base with connection terminals and removable

cover (snap-on design)

• Fully active, flexible probe with sensing element which acquires the average temperature

The connection terminals can be accessed after removing the cover. Cable entry is

made via a grommet which, if required, can be replaced by a cable entry gland M16

(IP 54).

After fitting the mounting flange, the sensor can be installed in 6 different immersion

positions so that the sensor housing is always located outside the insulation for layers

up to 70 mm. The probe with a length of 2 or 6 m is to be fitted across the air duct with

the help of the mounting clamps supplied with the sensor.

註：本產品所標價格僅為參考，實際價格、詳細技術參數及安裝方法請來電咨詢。

上海集靈信息技術有限公司
電話：021-54076221
傳真：021-34160281
網址：http://www.sh-joline.com
地址：上海市閔行區景聯路439號4號樓A區420室

新手教學

批發市場僅提供代購諮詢服務，商品內容為廠商自行維護，若有發現不實、不合適或不正確內容，再請告知我們，查實即會請廠商修改或立即下架，謝謝。