特點Characteristics
1、鋼板焊接機身剛性好，精度穩定。
Steel welded body provides high rigidity and stable precision.
2、采用乾式或濕式氣動摩擦離合一制動器，動作靈敏可靠。
Adoption of dry or wet pneumatic frictional clutch-detent, the movements are sensitive and reliable.
3、大齒輪、齒輪軸精密研磨，機床運行噪音低。
Precisely grinded rack wheel and wheel shaft, low machine operation noise.
4、滑塊六麵導軌，附氣壓式平衡裝置，運行平穩，精度準確。
Slide blocks with hex-sided guide rail and air pressured balance system, the movements are stable and the precisions are pinpointed.
5、采用液壓超負荷保護裝置，可有效保護壓力機和模具。
Adoption of the hydraulic over loading protection system, effectively protect the pressure machine and the mold.
6、采用PLC控制配自動送料裝置後能形成單機自動化或多機自動化沖壓生產線。
Adoption of PLC controlling system, when equipped with automatic feeding devices, an automatic pressing production line of mono-machine or multi-machines can be engendered.
7、本機型除定速外，有二種無級變速行程選擇，更適合沖壓件工藝要求和提高生產效率。
Two different stepless gearings and strokes are optional besides the machine set speed, appropriately fitting the craftsmanship of the pressing part and elevating production efficiency.
標準配置Standard accessories
| 1、液壓超負荷保護裝置。 | Hydraulic over loading protection system. |
| 2、自動潤滑裝置。 | Automatic lubricating system. |
| 3、裝模高度調節裝置（45T以下手動，60T以上電動）。 | Mould installation Height adjustment device. (manual below 45T, electronic above 60T). |
| 4、模高指示器（45T以下機械指示，60T以上數顯）。 | Mould height in dicator. (mechanical designation below 45T, digital display above 60T) |
| 5、滑塊及模具平衡裝置。 | Balance unit for slide block and mould. |
| 6、旋轉凸輪控制器。 | Rotation cam controller. |
| 7、曲軸角度指示器。 | Crooked shaft angle in dicator. |
| 8、工作計數器 | Working counter |
| 9、空氣吹料裝置。 | Air power material blowing device. |
| 10、頂料裝置 | Material propping device. |
| 11、防震用橡膠墊。 | Shockresist rubber mat. |
選配配置Optional accessories
| 1、囊式氣壓模墊裝置。 | Air bag mould mat device. |
| 2、無極變頻調速裝置或調速電機。 | Stepless gearing device.(Inverter or gearing motor). |
| 3、光電安全保護裝置。 | Photo electricity safety device. |
| 4、預置計數器。 | Preset arithmometer. |
| 5、電子凸輪控制器。 | Electronic cam control systemm (equipped as standard above model 250T). |
| 6、可移動電器控制箱（250T以上標配）。 | Movable electrical equipments control box. (equipped as standard above model 250T). |
| 7、可移動雙手操作盒（250T以上標配）。 | Movable operation box for both hands. |
| 8、腳踏開關。 | Pedal power switch. |
| 9、自動送料輸出軸。 | Automation feeding output shaft. |
| 10、自動送料器。 | Automatic feeding device. |
| 11、二度落防止裝置。 | Double degree dropping arrester. |
| 12、快速換模裝置。 | Rapid mold displacing unit. |
批發市場僅提供代購諮詢服務，商品內容為廠商自行維護，若有發現不實、不合適或不正確內容，再請告知我們，查實即會請廠商修改或立即下架，謝謝。
