掃本店

掃本品

TEL:0512-68733420

FAX:0512-68733427

MP:13915513800/18962140620

意大利FOX 機械壓力開關、電子壓力開關、防爆壓力開關、真空壓力開關、流量開關、流量計、水流開關、蓄能器、機械溫度開關、電子溫度開關、流量控製器等

蘇州知非機電設備有限公司---意大利FOX,蘇州知非機電設備有限公司-TEL:0512-68733420 是眾多歐美和日韓品牌的一級代理經銷商，公司長期服務於國內外汽車製造、冶金、核電、石化、新能源、港口機械、重工等行業。
歐洲優勢品牌有：德國FRAKO電容器、德國SODECA風機、德國 DOPAG穩壓閥、意大利 CALZONI液壓馬達、德國BURSTER傳感器、德國MAGTROL測功機、法國 ENTRELEC開關等
美國優勢品牌有： C3CONTROLS電位器、Domnick Hunter過濾器、BALDOR電機、KNOLL泵、McCANNA閥門等。
日韓優勢品牌有：韓國CPS拖鏈、日本FUJIKURA傳感器、日本NITTO SEIKO流量計等。
國FRAKO電容器、韓國CPS拖鏈的代理。 另外，我公司代理經銷有價格優勢的品牌產品有：
德國 DOPAG 穩壓閥/油脂閥 德國SODECA風機 美國 Domnick Hunter 過濾器
意大利 CALZONI 液壓馬達 德國 BURSTER 傳感器 德國 MAGTROL 測功機
瑞士 PMA 軟管 美國 BALDOR電機（銘牌） 德國BAUER 電機（銘牌）
意大利 ERO 溫控器 美國 MATHESON 過濾器 美國 KNOLL 泵
法國TECORA 氧傳感器 美國 ATHENA 溫控器 德國FUNKE風機
德國 PERMA PURE 乾燥管 德國R.STAHL 防爆插頭 西班牙 AZCUE 離心泵
德國 COAX 電磁閥 德國 DEMAG 電機（銘牌） 美國 ANNOVI REVERBERI 泵
意大利 CARRARO 齒輪箱 美國 McCANNA 閥門 英國 WORCESTER球閥/維修包
意大利TECNOLOGIC溫控器 法國GEORGIN壓力開關 意大利 BREVINI 減速機
德國 VIKING PUMP  油泵 德國 SETTIMA 螺旋泵 意大利 CHIARAVALLI 減速機






蘇州知非機電設備有限公司
TEL:0512-68733420 ;  FAX:0512-68733427
MP13915513800 / 18962140620
德國 ASC 傳感器 意大利 ROLLON 導軌  瑞士 SCHNEEBERGER 導軌
德國 SPANDAU 水泵 美國 AMOT 溫控閥 德國 ELBE 聯軸器
德國 GARBARINO 螺桿泵 意大利 MARPOSS 測頭 挪威 AUTRonICA 探測器
日本 MIDORI 電位器 日本 NITTO SEIKO流量計 法國 ENTRELEC繼電器/開關
德國IGUS 拖鏈電纜 德國 HELUKABEL 電纜 瑞士HUBER & SUHNER 電纜
意大利 ERSCE 開關 美國BENZLERS減速機 德國 NEUHAUSER 皮帶
意大利 PIZZATO 開關 德國 JAEGER 插頭 德國 BAUMULLER 電機
德國 DELTECH 過濾器 美國 HANKISON濾芯 美國 BALSTON 過濾器
日本 FUJIKURA 傳感器 日本 RION 測振機 日本 SHINKO 離合器
德國HEINEMANN 斷路器 意大利 ASA-RT 傳感器 德國 RINGFEDER脹緊套
美國 C3ConTROLS 電位器 德國 METRIX 變送器 德國 MAGNETROL 液位計
德國 THIES CLIMA 風速機 意大利 FLEXBALL 軟軸等，常用產品均現貨！

意大利FOX機械式壓力開關，可調式壓力開關，壓力繼電器，真空壓力開關，防爆壓力開關，電子式壓力開關，SPDT單刀雙擲開關，真空開關，差壓開關，數顯壓力開關等

PMM/PMN/MS/PS/MSA/PSP/PPL/PSK/VSM/PSM/ PFM/VCN/VCM/PML/PPC/ISR/ISF/PMF/PPCF/NTB/NTBM/NTBC/TB/TBM/TBS/TBP/ VC2A30 e PT2A30

MOD25/26/30/41/41BC/Mod23/25R/25D/31/41/42/30/40/26/48/49/266/681/682/700等

ITALY FOX SRL New products 
K7 Series
“K7” adjustable pressure switches allow the commutation of a micro-switch with exchange contacts. The switching point is adjustable by

means of an adjustment screw protected by a cap or in the external version K7P through graded knob with locking screw. The compact, rugged

construction provides mechanical stops of the spring is that the microswitch from over-pressure.
KLV5 Series
“KLV5” electronic pressure switches permit the regulation of one or two operating points with adjustable hysteresis. Simple and intuitive

in the programming, the new series is equipped by frontal display for setting and control of the working pressure. The instrument can be

ordered preset by factory.
FL5 Series
“FL5” electronic pressure switches permit the regulation of two operating points with adjustable hysteresis. Simple and intuitive in the

programming, the new series is equipped by frontal display for setting and control of the working pressure. The instrument can be ordered

preset by factory or easily set up according to the instructions.
TMS6 Series
 The “TMS6” series directly control the electric motor torque limiting their absorption of excessive energy during the start-up, with

significant benefits also for the duration of batteries when is installed on mobile applications. The instrument also encloses a timed

program that reverses the rotation of the engine.
XT5V
 The thermostats of “XT51V” series allow the commutation of two electronic micro-switches when two different value of temperature are

reached. These values can be set through the regulation key put on the display. The measuring values are from 0 to 100°C. Available with

extensions of fluid shutoff lengths up to 2 meters
TDK6
 Differential pressure transducer TDK6 sends an electrical signal proportional to the difference of value between two pressures. Two

versions are available: the first execution has the M3 electric connector with output signal 4 – 20 mA; the second execution has the M12

connector with 4 – 20 mA output signal and 2 temporized signal alarms, set at 16 mA and 20 mA. The maximum allowable pressure is 420 bar

and the differential pressures are available from 1 to 9 bar. All the parts on contact with the fluid are made of brass, or stainless steel
FX5
 Pressure switch with regulation of 2 alarm thresholds, serial port for connection to pc, complete control of the instrument by dedicated

software
BHP
 The BHP damper series extends the mechanical life of valves, actuators and other hydraulic components reducing vibrations and pressure

pulsations into the system. It is suitable for every hydraulic connection, it provides a wide range of volumes up to 5.000 L and

customizable size depending on the application. Volume depends on the working parameters and the required residual pulsation. His main

application is the damping of pulsations on delivery side of alternative plunger pumps.
HGVS
 The HGVS damper series extends the mechanical life of valves, actuators and other hydraulic components reducing vibrations and pressure

pulsations into the system. It is suitable for every hydraulic connection, it provides a wide range of volumes up to 5.000 liters and

customizable size depending on the application.
HGV
 Pulsation dampers for low maintenance vacuum bag with nitrogen accessible from above. Made of carbon steel, AISI 316 stainless steel,

duplex and super duplex made of welded construction. They are built with dimensions and maximum pressures on the plant-specific
HG
 Bladder type hydro pneumatic accumulators, made of carbon steel or stainless steel AISI 304L/316L, welded construction. The advantage of

this series is the simplicity of the bladder replacement through the disassemble of the top flange.
LGV Series
“LGV” vertical operation level gauges series is suitable to signal the minimum or maximum level of a fluid in the tank. The tool allows

to continuously display the level of a tank and the switching of two electrical contacts to the achievement of two different values of the

level set at will by means of the adjustment buttons placed on the display. The measured values ranging from 50 to 1500 mm.
LG4 Series
 The level switch series "LG4" in vertical operation emit a signal current or voltage proportional to the minimum or maximum level of a

fluid in a tank. The measured values ranging from 50 to 1500 mm.
HBX Series
 Hydropneumatic accumulator designed according to international standards. Stainless steel body with different possibilities of pockets in

relation to the fluid used.
Depliant Pulsation Damper
Depliant Complete
TMS7 Series
 The “TMS7” series directly control the electric motor torque limiting their absorption of excessive energy during the start-up, with

significant benefits also for the duration of batteries when is installed on mobile applications. The instrument also encloses
K4 Series
“K4” adjustable pressure switches permit opening or closing of an electric circuit upon reaching predetermined pressure value . The

preset pressure is found by rotating the external screw located at the centre of the instrument clockwise ... 
F4 Series
“F4” adjustable pressure switches allow a micro-switch commutation once a preset pressure value is reached. The set point is adjusted

working on the central screw (P3 execution) or intercepting the regulation dowel situated inside ... 
F3-K3 Series
“F3” and “K3” adjustable pressure switches allow the commutation of a micro-switch with exchange contacts once a preset pressure value

is reached. The preset pressure regulation is adjusted by the regulation dowel situated inside ... 
F3S Series
“F3S” adjustable pressure switches allow the commutation of a microswitch with exchange contacts once a preset pressure value is reached.

The preset pressure regulation is effected on the regulation knob inside the instrument and ... 
K6 - KR6 Series
“K6” and “KR6” adjustable electro-mechanical pressure switch, with exchange contacts, are suitable for application wher is not

necessary to modify frequently the operating point. The regulation screw, interceptable with a 2mm hexagonal ...  
K7 Series
“K7” adjustable pressure switches allow the commutation of a micro-switch with exchange contacts. The switching point is adjustable by

means of an adjustment screw protected by a cap or in the external version K7P through graded knob ... 
K9 Series
“K9” adjustable pressure switches activate a microswitch once a preset pressure value is reached. The preset pressure is set by rotating

the external nut clockwise to increase and vice-versa to decrease the value. The nut is supply ... 
F5 Series
“F5” pressure switches activate a microswitch once a preset pressure value is reached. The preset pressure is set by rotating the

internal screw located at the center of the instrument. The internal screw is accessible by removal ...  
K9-ATEX
 This pressure switch thanks to a special micro switch allow to combine the mechanical features of K9 standard with the ATEX II 2G EEX d II

C T6 certification. 
K5 Series
“K5” adjustable pressure switches activate a microswitch once preset value is reached. The pressure is set by rotating a graduated knob

or, for the economical version, by a setscrew located on top of the unit. Both systems are supplied ... 
K51 Series
 Adjustable pressure switch “K51” series with membrane execution are dedicated for use at low pressure applications wher high accuracy

and repeatability are requested. Activates a micro-switch to achieve a predetermined pressure value, ... 

B6-B10 Series
 The main feature of the plates B6 and B10 is to allow a single execution the connection between the pressure type K5 choice of all the

pressure taps

K5系列---意大利FOX真空壓力開關，負壓壓力開關，單刀雙擲開關，真空壓力開關，電子壓力開關，數顯壓力開關，壓力控製器，壓力調節閥

K4系列

F4系列

K3-F3系列

F3S系列

K6-KR6系列

K7系列

K9系列

F5系列

K9系列

K5系列

K51系列

B6-B10系列

AS5系列

KZ2系列

FX5系列

X5系列

KL5系列---意大利FOX 電子壓力開關，數顯壓力開關，數字壓力繼電器

KLV5系列

FL4系列

FL5系列

KD5-ATR141系列

W3系列----意大利FOX 真空壓力開關 負壓開關

WF4系列

ITALY FOX SRL New products 
K7 Series
“K7” adjustable pressure switches allow the commutation of a micro-switch with exchange contacts. The switching point is adjustable by

means of an adjustment screw protected by a cap or in the external version K7P through graded knob with locking screw. The compact, rugged

construction provides mechanical stops of the spring is that the microswitch from over-pressure.
KLV5 Series
“KLV5” electronic pressure switches permit the regulation of one or two operating points with adjustable hysteresis. Simple and intuitive

in the programming, the new series is equipped by frontal display for setting and control of the working pressure. The instrument can be

ordered preset by factory.
FL5 Series
“FL5” electronic pressure switches permit the regulation of two operating points with adjustable hysteresis. Simple and intuitive in the

programming, the new series is equipped by frontal display for setting and control of the working pressure. The instrument can be ordered

preset by factory or easily set up according to the instructions.
TMS6 Series
 The “TMS6” series directly control the electric motor torque limiting their absorption of excessive energy during the start-up, with

significant benefits also for the duration of batteries when is installed on mobile applications. The instrument also encloses a timed

program that reverses the rotation of the engine.
XT5V
 The thermostats of “XT51V” series allow the commutation of two electronic micro-switches when two different value of temperature are

reached. These values can be set through the regulation key put on the display. The measuring values are from 0 to 100°C. Available with

extensions of fluid shutoff lengths up to 2 meters
TDK6
 Differential pressure transducer TDK6 sends an electrical signal proportional to the difference of value between two pressures. Two

versions are available: the first execution has the M3 electric connector with output signal 4 – 20 mA; the second execution has the M12

connector with 4 – 20 mA output signal and 2 temporized signal alarms, set at 16 mA and 20 mA. The maximum allowable pressure is 420 bar

and the differential pressures are available from 1 to 9 bar. All the parts on contact with the fluid are made of brass, or stainless steel
FX5
 Pressure switch with regulation of 2 alarm thresholds, serial port for connection to pc, complete control of the instrument by dedicated

software
BHP
 The BHP damper series extends the mechanical life of valves, actuators and other hydraulic components reducing vibrations and pressure

pulsations into the system. It is suitable for every hydraulic connection, it provides a wide range of volumes up to 5.000 L and

customizable size depending on the application. Volume depends on the working parameters and the required residual pulsation. His main

application is the damping of pulsations on delivery side of alternative plunger pumps.
HGVS
 The HGVS damper series extends the mechanical life of valves, actuators and other hydraulic components reducing vibrations and pressure

pulsations into the system. It is suitable for every hydraulic connection, it provides a wide range of volumes up to 5.000 liters and

customizable size depending on the application.
HGV
 Pulsation dampers for low maintenance vacuum bag with nitrogen accessible from above. Made of carbon steel, AISI 316 stainless steel,

duplex and super duplex made of welded construction. They are built with dimensions and maximum pressures on the plant-specific
HG
 Bladder type hydro pneumatic accumulators, made of carbon steel or stainless steel AISI 304L/316L, welded construction. The advantage of

this series is the simplicity of the bladder replacement through the disassemble of the top flange.
LGV Series
“LGV” vertical operation level gauges series is suitable to signal the minimum or maximum level of a fluid in the tank. The tool allows

to continuously display the level of a tank and the switching of two electrical contacts to the achievement of two different values of the

level set at will by means of the adjustment buttons placed on the display. The measured values ranging from 50 to 1500 mm.
LG4 Series
 The level switch series "LG4" in vertical operation emit a signal current or voltage proportional to the minimum or maximum level of a

fluid in a tank. The measured values ranging from 50 to 1500 mm.
HBX Series
 Hydropneumatic accumulator designed according to international standards. Stainless steel body with different possibilities of pockets in

relation to the fluid used.
Depliant Pulsation Damper
Depliant Complete
TMS7 Series
 The “TMS7” series directly control the electric motor torque limiting their absorption of excessive energy during the start-up, with

significant benefits also for the duration of batteries when is installed on mobile applications. The instrument also encloses
K4 Series
“K4” adjustable pressure switches permit opening or closing of an electric circuit upon reaching predetermined pressure value . The

preset pressure is found by rotating the external screw located at the centre of the instrument clockwise ... 
F4 Series
“F4” adjustable pressure switches allow a micro-switch commutation once a preset pressure value is reached. The set point is adjusted

working on the central screw (P3 execution) or intercepting the regulation dowel situated inside ... 
F3-K3 Series
“F3” and “K3” adjustable pressure switches allow the commutation of a micro-switch with exchange contacts once a preset pressure value

is reached. The preset pressure regulation is adjusted by the regulation dowel situated inside ... 
F3S Series
“F3S” adjustable pressure switches allow the commutation of a microswitch with exchange contacts once a preset pressure value is reached.

The preset pressure regulation is effected on the regulation knob inside the instrument and ... 
K6 - KR6 Series
“K6” and “KR6” adjustable electro-mechanical pressure switch, with exchange contacts, are suitable for application wher is not

necessary to modify frequently the operating point. The regulation screw, interceptable with a 2mm hexagonal ...  
K7 Series
“K7” adjustable pressure switches allow the commutation of a micro-switch with exchange contacts. The switching point is adjustable by

means of an adjustment screw protected by a cap or in the external version K7P through graded knob ... 
K9 Series
“K9” adjustable pressure switches activate a microswitch once a preset pressure value is reached. The preset pressure is set by rotating

the external nut clockwise to increase and vice-versa to decrease the value. The nut is supply ... 
F5 Series
“F5” pressure switches activate a microswitch once a preset pressure value is reached. The preset pressure is set by rotating the

internal screw located at the center of the instrument. The internal screw is accessible by removal ...  
K9-ATEX
 This pressure switch thanks to a special micro switch allow to combine the mechanical features of K9 standard with the ATEX II 2G EEX d II

C T6 certification. 
K5 Series
“K5” adjustable pressure switches activate a microswitch once preset value is reached. The pressure is set by rotating a graduated knob

or, for the economical version, by a setscrew located on top of the unit. Both systems are supplied ... 
K51 Series
 Adjustable pressure switch “K51” series with membrane execution are dedicated for use at low pressure applications wher high accuracy

and repeatability are requested. Activates a micro-switch to achieve a predetermined pressure value, ... 

B6-B10 Series
 The main feature of the plates B6 and B10 is to allow a single execution the connection between the pressure type K5 choice of all the

pressure taps
 WF3/WF4

新手教學

批發市場僅提供代購諮詢服務，商品內容為廠商自行維護，若有發現不實、不合適或不正確內容，再請告知我們，查實即會請廠商修改或立即下架，謝謝。