1. 3   Protection:  (保護功能)

1.3.1  Table 8  DC output Over Voltage Protection.  (輸出過壓保護)

Note:The power supply shall be test at max.AC voltage (264Vac) and min .load or no load.

       1.3.2Table 9  DC Output Over current Protection.  (輸出過流保護)

Note: the over current protection should be test at other fo dc output at rated load .

    1.3.3Table 10  DC output Short Circuit Protection.(輸出短路保護)

       Note: the over current protection should be test at other fo dc output at rated load .

1.3.4.  Reset After Shutdown.(保護功能復位)

 If the power supply latches into shutdown state due to fault condition on its output

 protection, the power supply shall return to normal operation only after the fault

hasbeen removed and the Ps-on or Ac input has been cycled off /on with a minimum off

time of  2second. 

DEscriptION：

            （規格書）

       SPECIFICATION

MODEL NO.：

SBRD-025-1HA

DATE

PREPARED

CHECKED

APPROVED

document NO.：

SS-RD-1549

REV:

2009/3/17

1.0